Specification

RE7SAT
6" LINE VOLTAGE NON-IC REMODEL SHALLOW HOUSING
120V NON-IC E26 Base
Project
Location
6" LINE VOLTAGE NON-IC REMODEL SHALLOW HOUSING
LAMP & SOCKET:
PAR30 / PAR30LED / PAR38 / PAR38 LED / R30 / R40
100W max.(See trim for max. wattage)
E26 Medium Base
GU24 Socket also available
CRI>80%
PF>0.9
Color Temperature: 2700K-6500K
HOUSING: Die-formed aluminum for maximum heat dissipation and
rust protection. Designed for New Construction installation and
suitable for using in non-insulation covered ceilings. Housing can be
installed in 1/2" to 1-3/8" thick ceilings. Non-IC rated housing must
be kept 3" from insulation.
JUNCTION BOX:
ETL listed for through branch wiring 4 in-4 out J-box.
Designed for straight through conduit runs 1/2" and 3/4" romex
wiring knockouts.
Pre-wired junction box provided with removable access plate.
Knockouts equipped with pry out slots.
All leads are #18AWG wire, ground wire is connected to the bottom,
quick connectors are supplied on all leads.
LISTING: ETL listed for damp location W/Feed through.
PRODUCT DESCRIPTION
to be use in line voltage
RE7SAT: housing is designed for NON-IC ceiling. Accommodates
up to 75W PAR30, R30; 100W PAR38 R40 bulb.