Safety Information

NOTICE OF COMPLETION
AND
AUTHORIZATION TO APPLY THE UL MARK
This is an electronically generated letter. Signatures are not required for this document to be valid. Page 1 of 1
01/14/2016
Shenzhen Simsukian Electronics Technology Co Ltd
Mr. MENGQIANG ZHU
7th Fl, E Bldg, Hong Wan Ming
Jinhai Gushu Industry Zone
Xixiang St, Bao'an
Shenzhen Guangdong 518102, China
Our Reference:
File E331598, Vol. X1
Project Number
4787240357
Your Reference:
MENGQIANG ZHU accepted on Dec.8
Project Scope:
UL/CUL investigation for AC/DC ADAPTER, Models SK02T-XXXYYYYW ("XXX" is 3 digit
number code from 028 to 300, which represents the output voltage in volt after dividing by 10
in step of 0.1V, for example, 028 represents the output voltage is 2.8Vdc. "YYYY" is 4 digit
number code from 0001 to 0250, which represents the output current in ampere after dividing
by 100 in step of 0.01A, for example, 0001 represents the output voltage is 0.01A. W = "U",
"U" stands for Non-detachable American plug, W = "Z", "Z" stands for Detachable American
plug. Maximum output power is 15W). (Reference report: E331598-A7)
Dear Mr. MENGQIANG ZHU:
Congratulations! UL's investigation of your product(s) has been completed under the above Reference Number and
the product was determined to comply with the applicable requirements. This letter temporarily supplements the UL
Follow-Up Services Procedure and serves as authorization to apply the UL Mark at authorized factories under UL's
Follow-Up Service Program. To provide your manufacturer(s) with the intended authorization to use the UL Mark,
you must send a copy of this notice to each manufacturing location currently authorized under File E331598, Vol. X1.
Records in the Follow-Up Services Procedure covering the product are now being prepared and will be sent in the
near future. Until then, this letter authorizes application of the UL Mark for 90 days from the date indicated above.
Additional requirements related to your responsibilities as the Applicant can be found in the document “Applicant
responsibilities related to Early Authorizations” that can be found at the following web-site:
http://www.ul.com/EAResponsibilities
Any information and documentation provided to you involving UL Mark services are provided on behalf of UL LLC
(UL) or any authorized licensee of UL.
We are excited you are now able to apply the UL Mark to your products and appreciate your business. Feel free to
contact me or any of our Customer Service representatives if you have any questions.
Very truly yours,
Reviewed by:
Jack JIA
Bruce A. Mahrenholz
[phone]
847-664-3009
Engineer Project Associate
CPO Director
[e-mail]
[e-mail]
CC: ,
GUZ8783-39B39B