Specifications

ManualsBrandsElektra Beckum ManualsAir CompressorCompressor Mega 700 D

115 167 7700 / 1401 - 1.0

Mega 700 D

Betriebsanleitung. . . . . . . . . . . . . . . . . . . . 3

Operating Instruction . . . . . . . . . . . . . . . . 11

Instructions d'utilisation . . . . . . . . . . . . . . 18

Handleiding . . . . . . . . . . . . . . . . . . . . . . . 26

K0031IVZ.fm

Summary of content (10 pages)

PAGE 1
K0031IVZ.fm O OF F AU TO Mega 700 D 115 167 7700 / 1401 - 1.0 Betriebsanleitung . . . . . . . . . . . . . . . . . . . . 3 Operating Instruction . . . . . . . . . . . . . . . . 11 Instructions d'utilisation . . . . . . . . . . . . . . 18 Handleiding . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
U2K0031.
PAGE 3
Xk0013e.fm Operating Instruction ENGLISH ENGLISH 1.
PAGE 4
ENGLISH Table of Contents 1. Machine Overview.....................11 2. Please Read First! .....................12 3. Safety .........................................12 3.1 Specified conditions of use .........12 3.2 General safety instructions..........12 3.3 Safety devices.............................13 4. Operation ...................................13 4.1 Prior to initial operation ...............13 4.2 Mains connection ........................13 4.3 Generating compressed air.........13 5.
PAGE 5
ENGLISH meet all conditions necessary for the proper operation of the electric tool. Damaged protection devices or parts must be repaired or replaced by a qualified specialist. Have damaged switches replaced by a service centre. Do not operate electric tool if the switch can not be turned ON or OFF. Keep handles free of oil and grease. 3.3 Safety devices F OF AU outlets properly installed, earthed and tested; − fuse protection in accordance with the technical specifications.
PAGE 6
ENGLISH 3. Set pressure regulator (27) to required working pressure. The current working pressure is indicated by the regulated pressure gauge (28). 5.1 Periodic maintenance • Drain condensate from pressure vessel (35). Prior to each use • Check oil level of lubricator (30), top up with pneumatic oil if necessary. A Caution! Before connecting an air tool, make sure the max. operating pressure of the air tool used is not exceeded! 4.
PAGE 7
ENGLISH Every 250 operating hours • Replace air intake filter element of compressor pump. • Replace air filter element of filter/ regulator unit. Every 500 operating hours • Drain oil from compressor pump through the drain plug (34) and fill with fresh oil. Stapling / nailing D Combination Air Stapler/Nailer Kombi 40/50 for staples (type 90) from 20 mm to 40 mm and finishing nails (type SKN) from 20 mm to 50 mm. Stock-no.
PAGE 8
ENGLISH • Ratchet Wrench RS 320 (not illustrated) due to narrow design and rubbercovered ratchet head it is well suited for automotive applications and work in confined areas. Stock-no. 090 105 4541 • Ratchet Wrench RS 220 Set (not illustrated) this set comes complete with many accessories. Stock-no. 090 100 6717 • Air Screwdriver DS 1610 (not illustrated) reversible with quick action. Stock-no. 090 101 2440 reversing Combination Spray Gun UBS 820 (not illustrated) for commercially available 1.
PAGE 9
ENGLISH 9. Environmetal protection ble raw and plastic materials, which can be recycled. The machine's packaging can be 100 % recycled. These instructions are printed on chlorine-free bleached paper. Worn out machines and accessories contain considerable amounts of valua- 10. Technical Specifications Suction capacity l/min 600 Free air delivery (volume flow rate) l/min 440 Filling rate l/min 500 bar 10 l 90 Working pressure (compression end pressure) Pressure vessel volume No.
PAGE 10
U3K0028.