Specifications

15
ENGLISH
Every 250 operating hours
• Replace air intake filter element of
compressor pump.
• Replace air filter element of filter/
regulator unit.
Every 500 operating hours
• Drain oil from compressor pump
through the drain plug (34) and fill
with fresh oil.
A
Dispose of the waste oil envi-
ronmentally safe by taking it to a
proper collecting point!
Every 1000 operating hours
• Have unit serviced by an authorized
service station. This will extent the
compressor's service life considera-
bly.
5.2 Machine storage
1. Switch unit OFF and unplug.
2. Release pressure from tank and all
connected air tools.
3. Store machine in such way that it
cannot be started by unauthorized
persons.
A
Caution!
Do not store machine unpro-
tected outdoors or in damp environ-
ment.
Do not lay machine on its side for
transportation or storing.
For special applications the following
accessories are available at your spe-
cialist dealer – see back cover for illus-
trations:
Sealing
A Air Caulking Gun KP 910
for commercially available car-
tridges.
Stock-no. 090 101 0030
Sheet metal cutting
B Air Nibbler BN 540
extra small cutting radius; cuts steel
sheet up to 1.0 mm thickness.
Stock-no. 090 100 6784
Drilling
C Air Drill BM 310
especially handy tool for low-fatigue
working; right-hand rotation only.
Stock-no. 090 100 6725
• Air Drill BM 500 (not shown)
with 3/8" keyless chuck, fully revers-
ible with quick reverse feature.
Stock-no. 090 105 4533
Stapling / nailing
D Combination Air Stapler/Nailer
Kombi 40/50
for staples (type 90) from 20 mm to
40 mm and finishing nails (type
SKN) from 20 mm to 50 mm.
Stock-no. 090 105 4720
• Combination Air Stapler/Nailer
Kombi 32 (not illustrated)
for staples (type 90) from 15 mm to
32 mm and finishing nails (type
SKN) from 16 mm to 32 mm.
Stock-no. 090 105 4711
• Air Stapler KG 80/16 (not illustrated)
for staples (type 80) from 6 mm to
16 mm.
Stock-no. 090 105 4681
• Air Stapler KG 90/25 (not illustrated)
for staples (type 90) from 15 mm to
25 mm.
Stock-no. 090 105 4690
• Air Stapler KG 90/40 (not illustrated)
for staples (type 90) from 20 mm to
40 mm.
Stock-no. 090 105 4703
• Air Finish Nailer SKN 50 (not illus-
trated)
for finishing nails (type SKN) from
20 mm to 50 mm.
Stock-no. 090 105 4738
Spray painting
E Spray Gun FB 2200 HVLP
High-volume low-pressure feature
reduces paint mist bounce-back
and provides thicker coating at less
paint consumption.
Stock-no. 090 105 4460
• Paint Spray Gun FB 2200
(not illustrated)
with 0.5 l flow cup; professional
spray gun; steplessly adjustable
round, horizontal and vertical spray
pattern.
Stock-no. 090 105 4452
• Paint Spray Gun SB 200
(not illustrated)
with 1.0 l siphon cup.
Stock-no. 090 100 3882
• Paint Spray Gun FB 150
(not illustrated)
with 0.5 l flow cup; for spraying prim-
ers and paints of varying viskosity.
Stock-no. 090 100 3874
• Paint Spray Gun FB 90 (not illus-
trated)
with 0.75 l flow cup; for spraying
primers and paints of varying visko-
sity.
Stock-no. 090 105 6064
Chiselling
F Air Hammer Set MHS 450
for construction and auto body work
Stock-no. 090 100 9210
• Air Hammer Set MHS 315
(not illustrated)
to take off plaster and tiles and for
light chiselling work.
Stock-no. 090 100 6911
Tyre inflating / checking
G Tyre Inflator Gauge RF 480
professional version (calibrated).
Stock-no. 090 105 4630
• Tyre Inflator Gauge RF 363
(not illustrated)
same as RF 480, but not calibrated.
Stock-no. 090 105 4622
• Tyre Inflator Gauge RF 200
(not illustrated)
for inflating tyres and balls
(calibrated).
Stock-no. 090 105 6188
• Tyre Inflator Gauge RF 100
(not illustrated)
same as RF 200, but not calibrated.
Stock-no. 090 102 6724
Cleaning
H Blow Gun BP 200
all plastic body.
Stock-no. 090 105 4606
• Blow Gun BP 300 (not illustrated)
all plastic body; venturi nozzle pro-
vides extra high air volume.
Stock-no. 090 105 4614
• Blow Gun BP 70 (not illustrated)
light metal body (with 100 mm
extension nozzle).
Stock-no. 090 102 6726
• Blow Gun BP 60 (not illustrated)
light metal body (short).
Stock-no. 090 102 6718
Driving screws
I Impact Wrench SR 230
rugged impact wrench for DIY and
automotive applications.
Stock-no. 090 105 6170
• Impact Wrench SR 340 Set
(not illustrated)
professional version; many acces-
sories included.
Stock-no. 090 105 6137
• Impact Wrench SR 140 Set
(not illustrated)
for multiple DIY and automotive
applications; complete with many
accessories.
Stock-no. 090 100 8582
• Impact Wrench SR 120 Set
(not illustrated)
requires only minimal amount of air,
thus can be run on small compres-
sors; complete with many accesso-
ries.
Stock-no. 090 100 6750
6. Available Accessories