Gebrauchsanweisung Geschirrspüler GI 843
Inhalt Für den Bediener Für den Installateur Wichtige Hinweise 3 Gerätebeschreibung 4 Die Bedienungsblende 4 Vor dem Gebrauch Wasserenthärteranlage Klarspülmittel 5 5 7 Verwendung Ihres Geräts Geschirr einordnen Reinigerzugabe 8 8 10 Ratschläge für Spülen 11 Spülprogramme 12 Arbeitsschritte 13 Pflege und Reinigung Innenreinigung Reinigung der Siebe Außenreinigung Längerer Stillstand des Gerätes Frostgefahr Transport des Gerätes 14 14 14 15 15 15 15 Beseitigung von Funktionsstörungen Sich
Wichtige Hinweise Bewahren Sie diese Bedienungsanleitung sorgfältig zusammen mit dem Gerät auf, damit Sie sie auch in Zukunft zu Rate ziehen können. Sollten Sie das Gerät verkaufen oder Dritten überlassen oder es im Falle eines Umzuges in der alten Wohnung lassen, so sorgen Sie dafür, daß das Gerät komplett mit diesem Heft übergeben wird, damit der neue Besitzer sich über die Arbeitsweise des Gerätes und die diesbezüglichen Hinweise informieren kann.
Gerätebeschreibung 1. Härtebereich Einstellung 2. Geschirrkorbarretierung 1 3. Oberere Sprüharm 4. Salzbehälter 2 5. Behälter für Reiniger 10 3 6. Bedienblende 7. Behälter für Klarspüler 9 8. Siebe 9. Unterer Sprüharm 4 8 5 7 10. Oberer Geschirrkorb 6 IN110 Die Bedienungsblende 1 2 3 4 5 6 1. Betriebskontrollampe 4. Referenzmarke 2. Ein/Aus-Taste 5. Programmwähler 3. Handgriff 6.
Vor dem Gebrauch Vor der ersten Inbetriebnahme: 1. Sicherstellen, daß die Strom- und Wasseranschlüsse den Installationsanweisungen entsprechen. 2. Das Verpackungsmaterial aus dem Gerät nehmen. 3. Wasserenthärtungsanlage einstellen 4. 0,5 Liter Wasser in den Salzbehälter geben und mit Salz nachfüllen 5. Klarspüler einfüllen Wasserenthärteranlage Wasser enthält je nach Standort mehr oder weniger Kalk- und Mineralsalze, die sich am Geschirr ablagern und zu Fleckenbildungen führen.
Einfüllen des regenerierenden Salzes Verwenden Sie ausschließlich Spezialsalz für Geschirrspülmaschinen. Sonstige Salzarten enthalten Anteile von anderen Stoffen, die auf die Dauer den Wasserenthärter beschädigen können. Das beim Einfüllen verschüttete Salz kann korrosionsfördernd sein. Deshalb sollte Salz erst kurz vor einem Programmstart eingefüllt werden (mit Ausnahme des Programms Kurzspülen). Einfüllen: 1.
Klarspülmittel Dieses Mittel macht das Geschirr glänzend und begünstigt dessen Trocknung. Es wird während des warmen Klarspülgangs automatisch eingegossen. Der im Inneren der Türe eingebaute Behälter hat ein Fassungsvermögen von ca. 110 ml Klarspülmittel, das je nach eingestellter Dosierung für 16 - 40 Spülgänge ausreicht. Einfüllen von Klarspülmittel 1. Den Behälter öffnen. Hierzu den Verschluß (A) nach links drehen. 2.
Verwendung Ihres Geräts Geschirr einordnen Vor dem Einordnen des Geschirrs in den Geschirrspülautomaten, sollten alle groben Speisereste entfernt werden, um Verstopfungen der Siebe zu vermeiden und eine gründliche Reinigung zu gewährleisten. Ordnen Sie keine kleinen Gegenstände ein, die durch die Körbe fallen könnten. Zum Einordnen des Geschirrs ziehen Sie die Geschirrkörbe heraus. UI57 Unterkorb Im unteren Geschirrkorb werden Töpfe, Deckel, Teller, Salatschüsseln, Besteck usw. eingeordnet.
Oberkorb Im Oberkorb werden Tassen, Gläser, Salatschüsseln, Untertassen, Dessertteller bis zu einem Durchmesser von 24 cm eingeordnet. Gläser mit langem Stiel können umgedreht in den höheren Tassenfächern eingehängt werden. In den oberen Geschirrkorb kommen vorzugsweise leichte Gegenstände, wie Plastikschüsseln usw. Beschweren Sie diese Teile mit anderen Geschirrteilen. US69 Warnung! Prüfen Sie nach dem Einordnen des Geschirrs, ob die Sprüharme sich frei drehen Können.
Reinigerzugabe Verwenden Sie ausschließlich spülmaschinengeeignete flüssige, pulveroder tablettenförmige Reinigungsmittel. Spülmittel einfüllen Min = 15 g Max = 30 g D Um das Spülmittelpulver zu verwenden, folgendermaßen vorgehen: 1. Sollte der Deckel des Behälters geschlossen sein, drücken Sie leicht den Verschlußhebel (D) nach hinten. 2. Die Reinigermenge ist abhängig vom Verschmutzungsgrad sowie der Menge des Geschirrs.
Ratschläge für Spülen So sparen Sie Energie Maschinenungeeignetes Geschirr: Legen Sie das benutzte Geschirr sofort in die Maschine. Das kann auch mehrmals geschehen, bis die Maschine voll beschickt ist.
Spülprogramme Programm Verschmutzungsgrad und Geschirrart Universal 65°C Normal verschmutzt. Geschirr und Besteck Normal 65°C Leicht verschmutzt. Geschirr und Besteck Alles. Teilladung (im Laufe des Tages ganz aufzufüllen).
Arbeitsschritte 1. 10. Am Ende des Spülprogrammes Prüfen Sie, ob die Siebe sauber sind Nach Beendigung des Spülprogrammes bleibt die Maschine automatisch stehen. 2. 3. Prüfen Sie, ob Salz und Klarspülmittel vorhanden sind 11. Stellen Sie die Spülmaschine ab Einordnung des Geschirrs in die Maschine Schalten Sie die Maschine durch Drücken der Ein/Aus-Taste aus, die Betriebskontrollampe erlischt.
Pflege und Reinigung Innenreinigung Reinigen Sie die Gummidichtungen der Türe und des Spül- bzw. Klarspülmittelbehälters mit einem feuchten Tuch. Nehmen Sie einmal jährlich, oder auch häufiger, ein Spülprogramm bei leerer Maschine, mit Zugabe von Spülmittel oder besser eines handelsüblichen Spezialproduktes für die Spülautomatenpflege vor. Reinigung der Siebe Die Siebe im Spülraumboden sind in hohem Grade selbstreingend. Trotzdem sollten diese gelegentlich kontrolliert und gereinigt werden.
Außenreinigung Die Bedienungsblende sollte regelmäßig mit einem weichen, feuchten Tuch gereinigt werden. Es dürfen nur neutrale Reinigungsmittel und keine Scheuermittel oder Lösungsmittel, wie Azeton, Trichloräthylen usw. verwendet werden. Längerer Stillstand des Gerätes Bei längerem Stillstand des Geschirrspülautomaten: 1. Stecker aus der Steckdose ziehen und Wasserhahn abdrehen. 2. Füllen Sie den Behälter für den Klarspüler. 3.
Beseitigung von Funktionsstörungen Wenn Ihr Geschirrspülautomat nicht funktioniert, liegt es oft nur an Wartungsfehlern oder sonstigen Kleinigkeiten, die Sie selbst einfach und rasch beheben können. Bevor Sie daher den Service-Dienst rufen, gehen Sie die folgende Liste von möglichen Fehlerquellen durch. Störung Lösung Die Maschine startet nicht ● Die Gerätetür ist nicht dicht geschlossen. ● Der Stecker ist nicht korrekt in der Steckdose eingesteckt. ● Die Abflußsicherung überprüfen.
Wenn die Funktionsstörung nach Überprüfung dieser Fehlerquellen nicht behoben werden kann, rufen Sie den nächsten autorisierten Kundendienst und geben Sie die Fehlerart, die Modellbezeichnung (Mod.), die Produktnummer (Prod. No.) und die Herstellnummer (Ser. No.) an. Sie können diese dem Typenschild des Geschirrspülautomaten entnehmen (siehe Abbildung). Sicherheitsvorrichtungen zum Schutz vor Überschwemmung Prod.No. ........ Ser. No. ......... RA01 Mod. ........
Garantieurkunde Für unsere Geräte übernehmen wir die Garantie zu den nachfolgend aufgeführten Bedingungen. 1. elektrabregenz gewährt eine Garantie von 12 Monaten, gerechnet vom Tag, der Lieferung an den Endverbraucher. Der Kaufbeleg dient als Nachweis. Diese Garantiezusage gilt nur gegenüber Endabnehmern, die Erstkäufer unserer Geräte vom Händler sind. 2.
Hinweise für Prüfinstitute Vor einer Prüfung muß der Salzbehälter des Entkalkers und der Spülmittelbehälter gefüllt werden. Prüfnorm: EN 50242 Vergleichsprogramm: Universal 65°C Beladung: 8 Maßgedecke Klarspülmittelwähler: Position 4 Reinigerdosierung: 20 g im Behälter 5 g auf dem Behälterdeckel US55 UI57 Unteren Korb laden Oberen Korb laden Technische Daten Abmessungen Breite Höhe max. Tiefe max.
Installationsanweisung Aufstellung Stellen Sie die Maschine in der Nähe eines Wasserzuund ablaufes auf. Sie sollten die beim Elektroanschluß des Gerätes anfallenden Arbeiten von einem fachkundigen und zugelassenen Elektriker ausführen lassen. Lassen Sie die beim Wasseranschluß des Gerätes entstehenden Arbeiten von einem fachkundigen und zugelassenen Installateur ausführen. Anschluß des Wasserzulaufschlauches Dieser Geschirrspülautomat ermöglicht einen Anschluß an Kalt- oder Warmwasser bis 60°C.
2 Ø Ø Der Wasserablaufschlauch kann angeschlossen werden: 18 21 1 min 4 cm Anschluß des Wasserablaufschlauches min 30 cm max 100 cm 1. am Syphonverschluß des Spülbeckens, mit einer Schlauchschelle; 2. an einem festen Wandanschluß mit Ablaufbelüftung, und mit einem Innendurchmesser von mindestens 4 cm. CS13 Knicke oder Quetschungen des Ablaufschlauches sind zu verhindern, da dies den Wasserablauf verlangsamen oder blockieren kann.
Elektra Bregenz Aktiengesellschaft Josef-Heiß-Straße 1 Postfach 150 A-6130 Schaw Telefon: 0 52 42/69 40-0 Hotline zum Ortstarif: Möbel/Sanitär: 0800/800 6305 Elektro: 0800/800 6304 Fax/Vertrieb Elektrofachhandel: 0 52 42/69 40-185 Möbelfachhandel: 0 52 42/69 40-186 Sanitärfachhandel: 0 52 42/69 40-186 Kundendienst 6900 Bregenz Brielgasse 27 Telefon: 0 55 74/64 500 Fax: 0 55 74/64 702 4020 Linz Fichenstraße 4 Telefon: 0 732/34 95 01 Fax: 0 732/33 00 93 6130 Schwaz Josef-Heiß-Straße 1 Telefon: 0 52 42/69