Operation Manual

Instructions For Use. Page 6E30
Basic troubleshooting of an amplifier is similar to troubleshooting of any other
electrical or electronic equipment. Always check the most obvious possible causes
first. To give you a few ideas of what to look for, check the following:
TROUBLESHOOTING
If none of these actions effect a cure, please contact your dealer, or an author-
ised Musical Fidelity service agent. Remember, never open the case of the E30
yourself, as this will invalidate the guarantee.
Problem Probable Cause Remedy
No power when
POWER is pressed
Mains plug not inserted
correctly
Plug in securely
No sound Volume control is set to
minimum
Turn up the volume
No connection between pre
and power amps
Make appropriate
connection
Speakers are not
connected, or are
connected incorrectly.
Check speaker cables
Sound is not precise,
lacking in bass and
stereo image
Speakers are connected out
of phase
Make sure that both
speakers are
connected correctly