Operation Manual

Page 10

BALANCED

To use the BALANCED input, connect source balanced outputs to the BALANCED input sockets (see page 7).

Select BALANCED input by rotating the source select control so BALANCED is displayed.

Pressing the corresponding button on the remote handset has the same effect (see page 8).

ILLUMINATIONS

When used in darker environments, for example listening or home theatre rooms. It is possible to switch off

selected features to minimise distraction.

The illumination features (excluding the power/standby LEDs) can be switched on or off by pressing the DISPLAY

button on the front panel.

There is also a corresponding button on the remote control. To cover all options, all 8 permutations are available

for use, tabulated below.

STEP DISPLAY BASE ILLUMINATION VALVE ILLUMINATION

1 (default) ON ON ON

2 OFF ON ON

3 ON OFF ON

4 OFF OFF ON

5 ON ON OFF

6 OFF ON OFF

7 ON OFF OFF

8 OFF OFF OFF

To select the desired step, simply press the DISPLAY button on the front panel or remote until the required step

is reached. After step 8, the unit reverts back to step 1.

Please note, switching off the unit will store the current step. When next switched on, the remembered setting

will be overridden temporarily until after the initial 12 second mute delay. Once the delay is up, the unit will revert

to normal operation but with the step setting as previously selected.

0.0

ALANCED

OPERATION