018 USER MANUAL elektraLite LED pro line (a division of Group One), 70, Sea Lane, Farmingdale, NY11735, U.S.A. T. +1 (516)-249-3662. F. +1 (516)-249-8870 www.elektraLed.com www.myElektraLite.
1. Unpacking Thank you for choosing the ElektraLite LED Pro Line 1018 fixture. For your own safety, please read this manual before installing the device. This manual covers important information on installation and applications. Please keep this manual for future reference. ElektraLite LED Pro Line 1018 wash fixture uses 18 high powered 10 watt quad leds in a balanced arrangement giving you incredible output. Please unpack it carefully and check whether it was damaged in shipping.
. General Guidelines. ElektraLite LED Pro Line 1018 is a lighting fixture for professional use on stages, in clubs, theatres, etc. ElektraLite LED Pro Line 1018 should only be operated at between 120 to 240 volts and only indoors. ElektraLite LED Pro Line 1018 should not be operated 24/7 (24 hours a day; 7 days a week). ElektraLite LED Pro Line 1018 needs operation breaks to ensure that it will work for a long time without problems.
5. DMX-512 Control Connection Connect the provided XLR cable to the female 5-pin XLR output of your Elektralite CP 20 or other DMX controller. The other end should be connected to the male 5-pin XLR input of the ElektraLite LED Pro Line 1018. Then daisy-chain out of the first ElektraLite LED Pro Line 1018 and into the next ElektraLite LED Pro Line 1018 or other dmx device. Never “Y” split the DMX connection.
6. Menus in the fixture.
7. Static Look. The ElektraLite LED Pro Line 1018 can be set to a single static look quickly. Use the Menu button to get to STAT. Press Enter. The next screen will read R000. This is addressing the RED leds. If Red is to be in the static look, then use the ↑ or ↓ to increase the value of the red. Numbers are expressed in DMX values so 0 is no output and 255 is highest output. Press Enter to save the value. The screen will automatically advance to the next color Green.
10. DMX 512 Setting (address). Sets up the address for the dmx. Using the Menu button in the root menu go to DMX Press Enter to get into DMX and the display will read the current dmx channel. The display will read for example d.001 This means the fixture's current address is 1 To change it, use the ↑ or ↓ buttons to get to the correct address. 11. Fixture Personality. There are several different choices on how the fixture will operate.
13. Edit The Edit function allows the 10 of the inbuilt programs to be edited and customized. The programs that can be edited are PR01 through PR10. Each of the programs can have up to 99 scenes (SC01-SC99). Each scene has 5 components that can be edited on the fixture. They are the Red leds, the Green leds, the Blue leds, the time the scene is "played" and whether the scene has a crossfade or just "snaps" in. In the edit menu, the following is the flow diagram for programming.
14. Set. (Set has several Sub Menus which allow functions to be used). 1). UPLD. Custom programs can be uploaded from a master fixture into a slave fixture. First:- connect the fixtures to power and have a dmx cable going from the Master (dmx out) to the Slave (dmx in). Second:- using the Master fixture. Go through the Root Menu until Set. Press Enter and then use the ↑ or ↓ buttons to get to UPLD. Press Enter. The display will have 4 dots across the bottom. The password needs to be entered.
5).RGBW The RGBW setting allows the ability to calibrate the white achieved when mixing RGB. When RGBW is set to OFF, the output when Red, Green, and Blue is at maximum is 255 for all three colors. By definition this combination produces a white with a blue tinge which affects all other colors if cameras and other video equipment are "keyed" to this. When RGBW is set to ON, the output can be white balanced to whatever looks good on camera, for example.
16. CAL 2 When RGBW is turned on under the SET menu, then CAL2 will allow you to set up the white balance for the RGB components. To adjust the white balance, go through the Root Menu until CAL 2., the screen will read RGBW press enter again. The screen will display R255, use the ↑ or ↓ to set the Red component to the value required. Press Enter to save and the screen will automatically advance to the value for G (G255 for example).
ARC1 1 0-255 RED 2 0-255 GREEN 3 0-255 BLUE 0-50 Linear dimmer speed(DIM=OFF) 51-100 nonlinear speed1(DIM1) 101-150 nonlinear speed 2(DIM2) 151-200 nonlinear speed 3(DIM3) 201-255 nonlinear speed 4(DIM4) 1 0-255 MASTER DIMMER 2 0-255 RED 3 0-255 GREEN 4 0-255 BLUE 0-50 Linear dimmer speed(DIM=OFF) 51-100 nonlinear speed 1(DIM1) 101-150 nonlinear speed 2(DIM2) 151-200 nonlinear speed 3(DIM3) 201-255 nonlinear speed 4(DIM4) 1 0-255 RED 2 0-255 GREEN 3 0-255 BLU
ARC2+S 1 0-255 MASTER DIMMER 2 0-255 RED 3 0-255 GREEN 4 0-255 BLUE 5 0-255 WHITE 6 0-255 STROBE 0-50 Linear dimmer speed(DIM=OFF) 51-100 nonlinear speed 1(DIM1) 101-150 nonlinear speed 2(DIM2) 151-200 nonlinear speed 3(DIM3) 201-255 nonlinear speed 4(DIM4) 1 0-255 H hue 2 0-255 S saturation level 3 0-255 V brightness 0-50 Linear dimmer speed(DIM=OFF) 51-100 nonlinear speed 1(DIM1) 101-150 nonlinear speed 2(DIM2) 151-200 nonlinear speed 3(DIM3) 201-255 nonlinear
DMX Channel Assignments.
DMX Channel Assignments (Cont.
DMX Channel Assignments (Cont.
18. Cleaning and maintenance. Now ignoring maintenance and cleaning is very good way of creating problems "down the road" and many companies and installations do just that. However the net result is, no matter what the fixture, premature failure! Changing the oil in a car most people do on a regular basis. So with the fixtures regular maintenance it an excellent practice, if you want the fixtures to last.
Other Products. ElektraLite LED Pro Line has other great products that are manufactured under the Elektralite product line. Go check out the website at www.myelektralite.
The Elektralite TurboHazer (check out the ElektraHazer too!)