Operation Manual

TECHNICAL PARAMETERS
Power supply
230 V/ 50 Hz
Communication type
two-way
Frequency 433.92 MHz
Sensitivity < - 92 dBm
Range 150 m
(in free area),
20 m
(in built-up area)
Output relé, max.16A/ 250 VAC
Protection class IP20 or higher acc. to installation
Protection rate II
Working temp. 0 to 40°C
Dimensions
(LxWxD)
49.5 mm x 45.5 mm x 26 mm
in compliance with RoHS
Pb
LEAD FREE
BPT001 is suitable for switching heating panels, direct
heaters, radiant panels, heating mats, etc. It switches the con-
nected device according to the information received from the trans-
mitting unit (BPT010 or BPT710 thermostat). To be installed in
interior rooms. Do not locate near power lines!
MADE IN CZECH REPUBLIC
WARRANTY CERTIFICATE
(a 2-year warranty is granted for the product)
Product number:
Date of sale:
Shop stamp:
Checked by:
In case of guarantee or
post-guarantee service, send
the receiver (including a copy
of the confirmed proof of
purchase) to the
manufacturer’s address.
DECLARATION OF CONFORMITY
We, ELEKTROBOCK CZ s.r.o., herewith declare that our product BPT001 conforms to
the basic requirements and other corresponding provisions of the directive 1999/5/ES.
Issued: 01.04.2012 on www.elbock.cz
ELEKTROBOCK CZ s.r.o.
Blanenská 1763
Kuřim 664 34
Tel.: [phone]
www.elbock.cz
bpt001_en:Layout 1 1.10.2012 18:05 Page 4