User Manual

3. PANEL LAYOUT AND CONNECTORS

3.2 REAR CONNECTORS

1 32 4 5 6 7 8

10 11 12

1. POWER. Turns the unit on and o.

2. DC IN. Use the included Elektron PSU-3b power adapter, connected to a power outlet.

3. USB. Use an A to B USB 2.0 connector cable to a computer host.

4. EXP/CV IN. Input for expression pedal or CV. Use standard 1/4” mono phone plug for CV signals.

5. MIDI THRU/SYNC B. Forwards data from MIDI IN. Can also be conﬁgured to send DIN sync to legacy

instruments. Use a standard MIDI cable to connect another MIDI device in the chain.

6. MIDI OUT/SYNC A. MIDI data output. Can also be conﬁgured to send DIN sync to legacy instruments.

Use a standard MIDI cable to connect to MIDI In of an external MIDI device.

7. MIDI IN. MIDI data input. Use a standard MIDI cable to connect to MIDI Out of an external MIDI device.

8. AUDIO IN L/R. Inputs for sampling or sound card use. Use 1/4” mono phone plugs (unbalanced

connection).

9. TRACK OUT. Individual drum voice outputs. Use either 1/4” mono phone plugs (unbalanced connection)

or 1/4” (Tip/Ring/Sleeve) phone plugs (balanced connection).

10. EXT IN L/R. Use 1/4” mono phone plugs (unbalanced connection) to input sound from an external audio

source.

11. MAIN OUT L/R. Use either 1/4” mono phone plugs (unbalanced connection) or 1/4” (Tip/Ring/Sleeve)

phone plugs (balanced connection).

12. HEADPHONES OUT. Connect standard headphones with 1/4” stereo phone plug.

3.3 SETTING UP AND STARTING THE ANALOG RYTM MKII

Make sure you place the Analog Rytm MKII on a stable support, such as a sturdy table with sucient cable

space or mount on a rack capable of a 3 kg load.

Before you connect the Analog Rytm MKII to other equipment, make sure all units are switched o.

Plug the included PSU-3b adapter to a power outlet and insert the small plug into the Analog Rytm MKII DC

IN connector.

Connect the Main Out L/R from the Analog Rytm MKII to your mixer or ampliﬁer.

If you want to use MIDI in conjunction with your Analog Rytm MKII, connect the MIDI OUT port of the device

you wish to send data from to the MIDI IN port of the Analog Rytm MKII. The MIDI THRU port duplicates the

data arriving at the MIDI IN port, and you can use it for chaining several MIDI units together.

Switch on all units. Switch on the Analog Rytm MKII by pressing the Power rocker switch located at the

back of the unit. Wait 2 seconds after the screen goes out before restarting the unit.