User Manual
6. THE USER INTERFACE
16
6. THE USER INTERFACE
The screen is the center of Analog Rytm MKII editing.
2 31
4567
1. The active kit. Here you can also see the full name of the parameter you adjust here when you turn a
DATA ENTRY knob.
2. Tempo.
3. The playback/recording status of the sequencer shown by “record”, “play”, “pause” and “stop” symbols;
, , , and .
4. Track parameters. They show what the DATA ENTRY knobs control and their current parameter values
5. The active pattern. To the left of this, you can see the active song row. A “_ _:” indicates that the scratch
pad row is active.
6. Track level.
7. Track name.
6.1 SCREEN NAVIGATION
When entering a menu or sub-menu, navigation is done using the [ARROW] keys [UP], [DOWN], [LEFT] or
[RIGHT]. The TRACK LEVEL knob can be used to quickly scroll through menus and lists.
[YES] is used to arm, select, enter sub-menus and tick/untick boxes.
[NO] is used to negate, deselect or go back one or more steps.
When on a menu or sub-menu the [NO] key can be used to go back, one step at a time, all the
way to the main screen.
6.2 PARAMETER EDITING
The DATA ENTRY knobs are used to change the value of the track parameters. The position of the param-
eters on the screen correspond to the physical location of the knobs on the front panel. Press and hold a
[PARAMETER] key to see the values for all parameters on that PARAMETER page.
6.2.1 QUICK PARAMETER EDITING
If the DATA ENTRY knob is pressed when it is turned, the parameters will be adjusted in larger incre-
ments. You can quickly sweep through a whole parameter range in this manner.
6.2.2 PARAMETER VALUE JUMP
Pressing [FUNC] while editing certain parameters makes the parameter values jump to appropriate
positions. The time of the Delay, for example, jumps between 16, 32, 64 and 128 and the oscillator tuning
jumps whole octaves.
6.2.3 [FUNC] KEY PRESS COMBINATIONS
The standard way to use the [FUNC] key in combination with other keys, is to press and hold [FUNC]
and then make a short press on the second key in the combination. For some key combinations, it is also
possible to access a sub-menu by pressing and holding [FUNC] + second key for a second.