User Manual
7. QUICK START
20
3. Press any of the [PADS] to mute the corresponding track. Press again to unmute. The color of the
<PADS> indicates the mute status. Unlit <PADS> are muted. Green <PADS> are audible.
4. Press and hold [FUNC] and then any of the [PADS] to preselect a mute, or mute/unmute sever-
al tracks in one go. Once you release [FUNC], the selected mutes come into eect. Blue colored
<PADS> show the preselected mutes.
When MUTE mode is active, press [RTRG] and one of the [PADS] if you wish to activate
solo, in other words, mute all tracks except the one selected. Press again to deactivate
solo. Keeping [RTRG] pressed, multiple tracks may be solo activated/deactivated. Solo
activated <PADS> are of turquoise color.
7.1.5 TEMPO
To change the overall BPM setting, open the TEMPO screen by pressing the [TEMPO] key.
Use the TRACK LEVEL knob to change tempo in steps of one BPM. Pressing the knob while turning it
changes the tempo eight steps at a time. The [ARROW] keys [UP] or [DOWN] change the tempo steps
of 0.1 BPM.
On the main interface screen, you can also press and hold [ARROW] keys [LEFT] or [RIGHT] to tempo-
rarily nudge the tempo up or down by 10%. Release to revert the BPM to its original setting.
7.1.6 EDITING PARAMETERS
Each drum track has five PARAMETER pages, accessed by pressing the [SRC], [SMPL], [FLTR], [AMP],
and [LFO] keys. The parameters found here aect the sound in various ways. When the FX track is
active, the corresponding PARAMETER pages are DELAY, REVERB, DISTORTION, COMPRESSOR, and
LFO, accessed by the same keys.
1. Make sure a pattern is playing.
2. Press [TRK] + [PADS] 1–12 to select one of the twelve drum tracks.
3. To change, for example, the cuto of the filter, press the FILTER key. The display then shows the FIL-
TER page. The parameter labeled FRQ changes the cuto of the filter. Turn DATA ENTRY knob E to
change the parameter value, and hear how the Sound is aected.
Try out the rest of the PARAMETER page parameters to explore a variety of sound shaping possibilities.
To reload the Sound to its original state, press [NO] + [MUTE].
To reload the whole kit to its original state, press [NO] + [PLAY MODE].
To save kit changes, press [YES] + [PLAY MODE].