User Manual

11. THE SEQUENCER

TRIGS SETUP will take you to the quantization menu for the active track. See section “11.7.1 QUANTIZA-

TION” on page 42.

RELOAD TRACK will reload the active track. Since tracks are a part of patterns which are automatical-

ly saved, it will either be reloaded to its original auto-saved state or to a speciﬁcally saved state which

can be determined by utilizing the SAVE TRACK command. Press [NO] + [CHRO] for a shortcut to the

RELOAD TRACK command.

SAVE TRACK will save changes made to the active track. This is a special feature available in addition to

the general, automatic, saving of patterns which occur when patterns are changed. The feature is useful

in situations where an individual track is being worked on, the results are desirable, and you want to

keep on working with the track while having the ability to revert it to a speciﬁcally saved state. The SAVE

TRACK command makes this possible. When reloading the track, it will not be reloaded to its original,

pattern auto-saved, state, but to the manually saved state. Press [YES] + [CHRO] for a shortcut to the

SAVE TRACK command.

11.6 PATTERN MENU

In the PATTERN menu patterns can be saved and reloaded. Open the menu by pressing [FUNC] + [SCNE].

Select between the available commands by using the [UP]/[DOWN] arrow keys. Conﬁrm selections with

[YES].

RELOAD PATTERN will reload the active pattern. It will either be reloaded to its original auto-saved state

or to a speciﬁcally saved state which can be determined by utilizing the SAVE PATTERN command.

Press [NO] + [SCNE] for a shortcut to the RELOAD PATTERN command.

SAVE PATTERN will save changes made to the active pattern. This is a special feature available in addi-

tion to the general, automatic, saving of patterns which occur when patterns are changed. The feature is

useful in situations where a pattern is being worked on, the results are desirable, and you want to keep

on working with the pattern while having the ability to revert to a speciﬁcally saved state. The SAVE PAT-

TERN command makes this possible. When reloading the pattern, it will not be reloaded to its original,

auto-saved, state, but to the manually saved state. Press [YES] + [SCNE] for a shortcut to the SAVE

PATTERN command.

The RELOAD PATTERN command is great when improvising live. Any changes made to the

active pattern, like adding bass line notes or similar, can immediately be undone.

11.7 TRIG MENU

Set the actions for when a note is trigged in the TRIG menu. Press the [TRIG] key to access the menu.

Change settings using the DATA ENTRY knobs. These general settings aect note trigs placed on the

sequencer. On any step of the pattern, trigs may be locked to other settings by ﬁrst pressing and holding a

[TRIG] key, then changing the settings. Setting SYN and SMP to zero on a note trig turns it into a lock trig.

Note that the TRIG settings are stored along with the active pattern, not to the active kit.