User Manual

11. THE SEQUENCER

speciﬁed by the VEL parameter in the TRIG menu. For more information, please see “11.7 TRIG MENU” on

page 41.

11.9 CLICK TRACK

The CLICK TRACK menu controls the internal metronome of Analog Rytm MKII. Open the menu by pressing

[FUNC] + [RTRG]. Use the [UP]/[DOWN] arrow keys or the TRACK LEVEL knob to scroll through the list of

settings. Press [LEFT]/[RIGHT] or any of the DATA ENTRY knobs to change the highlighted setting.

ACTIVE activates/deactivates the metronome. It is also possible, outside of this menu, to keep [FUNC] +

[RTRG] pressed for a second to toggle the metronome click on and o.

TIME SIG. NUM controls the note measure of the metronome time signature.

TIME SIG. DEN controls the beat measure of the metronome.

PREROLL controls for how many bars the metronome will sound before the sequencer starts playing.

This setting is only relevant when LIVE RECORDING mode is initiated.

VOLUME controls the volume of the click.

11.10 SCALE MENU

The length and timing of the pattern can be changed on this screen. Two modes exist in the SCALE menu.

In NORMAL mode all tracks share the same length. In ADVANCED mode each track can have dierent

lengths. Access the SCALE SETUP menu by pressing [FUNC] + [PAGE]. Use the [LEFT] and [RIGHT]

arrow keys to select between the available settings. Use the [UP] and [DOWN] keys to adjust the dierent

settings and to select between the two modes.

11.10.1 NORMAL MODE

This is the default mode. In this mode, all tracks of the pattern share the same length and time signature.

This screen will appear when the NORMAL setting is active.

The ﬁrst two settings control the step length of the pattern. The leftmost number selects the number of

steps in the pattern. The maximum number of steps available to the pattern is determined by the total

length, set by the parameter to the right. This can be either 16, 32, 48 or 64 steps. If 17 steps or more

are used in a pattern, the [PAGE] key is, while in GRID RECORDING mode, used to toggle between the

dierent pattern pages.

The rightmost parameter controls the time signature of the pattern. It oers seven possible settings,

1/8X, 1/4X, 1/2X, 3/4X, 1X, 3/2X and 2X. A setting of 1/8X will play back the pattern at one-eighth of the

set tempo. 3/4X plays the pattern back at three-quarters of the tempo. 3/2X will play back the pattern

twice as fast as the 3/4X setting. 2X will make the pattern play at twice the BPM.

Trigs are automatically copied when extending the length of a pattern. If a pattern consists of for exam-

ple two pages and the pattern length is increased to four pages; the two added pattern pages will be

copies of the ﬁrst two pattern pages.

Press the [PAGE] key for quickly changing the total length of the pattern. Press the [TRIG] keys to

quickly change the number of steps of the pattern.