User Manual
11. THE SEQUENCER
48
• Parameter slides can be quickly added to note trigs or lock trigs. Keep the note trig
or lock trig pressed and press [BANK H]. A parameter slide trig will automatically be
placed on the same sequencer step as the note trig/lock trig.
• Press a note trig/lock trig to quickly see if a parameter slide trig is placed on the same
sequencer step as the trig. If that is the case, the [BANK H] key will light up.
11.11.9 COPY, PASTE, AND CLEAR OPERATIONS
Patterns, track pages, tracks, and trigs can be copied, pasted and cleared.
The active pattern can be copied to either another location in the same bank or to a location in anoth-
er bank. To perform a pattern copy operation, GRID RECORDING mode must be inactivated. Copy the
pattern by pressing [FUNC] + [RECORD]. Select another pattern and paste the copied pattern to this lo-
cation by pressing [FUNC] + [STOP]. The operation can be undone by pressing [FUNC] + [STOP] again.
Clear a pattern by pressing [FUNC] + [PLAY]. Undo the operation by repeating the key presses.
After selecting a pattern, and before releasing any key, [RECORD], [PLAY] and [STOP] can be pressed
to copy, clear or paste patterns.
Individual sequencer tracks can be copied, pasted and cleared in the same way as patterns. To do so,
GRID RECORDING mode needs to be active.
A single track page may also be copied, pasted and cleared. It is similar to copying/pasting/clearing
a track, but will only aect the active track page. GRID RECORDING mode needs to be active. Select
the track page of choice by pressing the [PAGE] key. Copy by pressing [PAGE] + [RECORD]. Select a
new track page and press [PAGE] + [STOP] to paste. Undo by pressing [PAGE] + [STOP] again. Press
[PAGE] + [PLAY] to clear the active track page. Undo the operation by repeating the key presses.
Trigs, complete with all parameter lock settings, can be copied, pasted and cleared as well. GRID RE-
CORDING mode needs to be active to access this functionality. Press and hold a trig and press [RE-
CORD] to perform the copy operation. Paste by holding another [TRIG] key and pressing [STOP]. It is
also possible to copy more than one trig. Hold several trigs and press [RECORD]. The trig first pressed
will act as the starting point. When pasting, the other copied trigs will be placed in relation to this trig.
Paste the copied sequence of trigs by holding another [TRIG] key and pressing [STOP]. Clear trig locks
by holding one or more trigs and press [PLAY].
11.11.10 QUICK SAVE AND RELOAD COMMANDS
Kits, Sounds, tracks, patterns, and songs can instantly be saved and reloaded. When reloading, settings
will revert to their saved state.
• To quick save a kit, press [YES] + [PLAY MODE]. This command is the same as the SAVE KIT com-
mand found in the KIT menu, see “10.2 KIT MENU” on page 26.
• To quick save the track Sound of the active track, press [YES] + [MUTE]. This command is the same
as the STORE TRACK SOUND command found in the SOUND MANAGER menu, see “10.5.2 SOUND
MANAGER” on page 32.
• To quick save a track, press [YES] + [CHRO]. The operation is the same as the SAVE TRACK com-
mand, see “11.5 TRACK MENU” on page 40.
• To quick save the active pattern, press [YES] + [SCNE]. The operation is the same as the SAVE PAT-
TERN command, see “11.6 PATTERN MENU” on page 41. This is useful to create a restore point
before you start a session of live tweaking that might not turn out the way you want.
• To quick save a song, press [YES] + [PERF]. The command is the same as the SAVE command found
in the SONG menu, see “12.2.4 SONG MENU” on page 51.
• To quick reload a kit, press [NO] + [PLAY MODE]. This command is the same as the RELOAD KIT
command found in the KIT menu, see “10.2 KIT MENU” on page 26. This is useful in a live situation
after a kit has been subject to improvised changes.
• To quick reload the track Sound of the active track, press [NO] + [MUTE]. This is the same as kit
reload, but only on the active track (not all tracks).
• To quick reload a track, press [NO] + [CHRO]. The operation is the same as the RELOAD TRACK
command, see “11.5 TRACK MENU” on page 40.
• To quick reload the active pattern, press [NO] + [SCNE]. The operation is the same as the RELOAD
PATTERN command, see “11.6 PATTERN MENU” on page 41. Only useful until another pattern is
selected, as an undo operation after live changes.
• To quick reload a song, press [NO] + [PERF]. The command is the same as the RELOAD command
found in the SONG menu, see “12.2.4 SONG MENU” on page 51.