User Manual
14. GLOBAL SETTINGS MENU
54
14. GLOBAL SETTINGS MENU
The GLOBAL SETTINGS menu oers settings that aect Analog Rytm MKII on a global level. Global
sequencer, MIDI, and track routing settings are made here. Up to four Global slots are available, each with
its individual settings.
Access the menu by pressing [GLOBAL SETTINGS]. Scroll the list by using [UP]/[DOWN] or the TRACK
LEVEL knob. Open a highlighted menu by pressing [YES].
14.1 PROJECT
This is where you manage the projects. This menu is described in the section “9. PROJECTS” on page 24.
14.2 SAMPLES
Manage your samples here. On the main screen, seen below, you can access one of three main directories,
FACTORY, INCOMING, or recorded. In the FACTORY directory, several preset samples can be found in one
of the ten subdirectories. The INCOMING directory, is the default destination for samples sent to the Ana-
log Rytm MKII +Drive storage via the C6 utility software. The RECORDED directory is the default destina-
tion for samples that is sampled with the Analog Rytm MKII. Press [YES] to open a directory.
To open a subdirectory, simply highlight it using the [ARROW] keys and press [YES]. To exit a directory,
select the item labeled “..” at the very top of the screen and press [YES]. Do this repeatedly to return to the
top of the directory hierarchy. To discern directories from sample files, all directories, including the directory
exit row, “..”, are labeled with a (D) at the end of the row. When browsing a directory in the +Drive, a sample
assigned to one of the 127 sample slots of the active project has its slot number shown after its name, as
seen below.
14.2.1 LOADING, UNLOADING OR REPLACING A SAMPLE
The following is an example of how to load one or several of the preset samples to the active project.
First, open the FACTORY directory. Second, open the PERCUSSION directory. Highlight the first sample,
“Agogo High” and press [YES] to tick it. Browse the list and tick a few other samples. Any sample may be
previewed (played back by the voice of the active track) by first highlighting it and then pressing [FUNC]
+ [YES]. Circa, ten seconds of the sample will be previewed. Third, press the [RIGHT] arrow key. A menu
will appear on the right side of the screen.