User Manual

14. GLOBAL SETTINGS MENU

Select LOAD TO PROJ and press [YES]. The samples you selected (ticked) will now appear in the ﬁrst

available empty slots out of the 127 user sample slots of the active project. To view the user samples

currently in the RAM of the active project, press the [LEFT] arrow key twice. This will bring up the left

side menu.

Select VIEW RAM and press [YES]. A list will appear, showing all 127 user sample slots. A circle at the

right end of the row means that the sample is currently unused in the active project.

On this screen, the 127 user samples may be unloaded individually or collectively to empty the slots.

Scroll the list using the [ARROW] keys [UP]/[DOWN] or the TRACK LEVEL knob. Press [YES] to tick

individual samples, or bring up the right-hand menu by pressing [RIGHT] and choose SELECT ALL. On

the right-hand menu, select UNLOAD to empty the slots of the ticked samples.

Any sample in the RAM may be individually replaced. Simply highlight the slot containing the sample you

wish to replace, open the right-hand menu by pressing [RIGHT] and select REPLACE. Browse the direc-

tories of the +Drive, locate the desired sample and press [YES] to place it in the previously highlighted

sample slot. If you wish to go back to browsing the +Drive storage directories, press [LEFT] twice and

select VIEW +DRIVE.

14.2.2 RECEIVING SAMPLES FROM A COMPUTER

1. Connect Analog Rytm MKII to the computer via USB.

2. Open the Elektron Transfer utility software (available for free on the Elektron website) on your

computer.

3. Select the USB MIDI ports for your Analog Rytm MKII on the Transfer start screen.