User Manual

14. GLOBAL SETTINGS MENU
57
micro timing. Read more about micro timing and quantization in the section “11.7.1 QUANTIZATION” on page
42.
KIT RELOAD ON CHG will cause kits to reload to their saved state automatically as soon as a new kit be-
comes active. This is useful if you, for example, play live, have tweaked a kit extensively and want it to return
to its saved state automatically next time it becomes active again.
14.5 MIDI CONFIG
In this menu, various sub-menus dealing with the MIDI functionality of Analog Rytm MKII are found.
14.5.1 SYNC
Controls how Analog Rytm MKII receives and sends MIDI clock and transport commands. Change set-
tings by using the [LEFT]/[RIGHT] arrow keys or the [YES] key.
CLOCK RECEIVE will when active make Analog Rytm MKII respond to MIDI clock sent from external
devices.
CLOCK SEND will when active make Analog Rytm MKII transmit MIDI clock.
TRANSPORT RECEIVE will when active make Analog Rytm MKII respond to system real-time mes-
sages like play, stop, continue and song position pointer.
TRANSPORT SEND will when active make Analog Rytm MKII send out system real-time messages
like play, stop, continue and song position pointer.
PRG CH RECEIVE will when active make Analog Rytm MKII respond to incoming program change
messages, which is useful when wanting to select patterns externally. The MIDI channel that will listen
to incoming program change messages is set in the MIDI CHANNELS menu. For more information,
please see “14.5.3 CHANNELS” on page 58.
PRG CH SEND will when active send program change messages when patterns are changed. The
MIDI channel that will send program change messages is set in the MIDI CHANNELS menu, covered
on page 56.
14.5.2 PORT CONFIG
MIDI port related settings are found in this menu. Change settings by using the [LEFT]/[RIGHT] arrow
keys.