User Manual

14. GLOBAL SETTINGS MENU

TRACK 1–12, FX selects dedicated MIDI tracks that will control the drum and FX tracks. An OFF set-

ting will make the track disregard any incoming MIDI messages.

PERF CHANNEL selects the MIDI channel the knobs will send MIDI data on when PERFORMANCE

mode is active.

AUTO CHANNEL selects the MIDI channel that will give access to the currently active track. If an ex-

ternal MIDI keyboard connected to Analog Rytm MKII sends MIDI data on this channel, the keyboard

will control the active track. This is useful when for example quickly changing between the active drum

tracks to play dierent Sounds.

PROGRAM CHANGE IN CHANNEL selects the MIDI channel that will listen for incoming program

change messages. An AUTO setting will use the AUTO channel. Enable Analog Rytm MKII to respond

to program change messages in the MIDI SYNC menu. For more information, please see “14.5.1 SYNC”

on page 57.

PROGRAM CHANGE OUT CHANNEL selects the MIDI channel that will send program change mes-

sages when changing patterns. An AUTO setting will use the AUTO channel. Enable Analog Rytm MKII

to send program change messages in the MIDI SYNC menu. For more information, please see “14.5.1

SYNC” on page 57.

14.6 TRACK ROUTING GLOBAL

In this menu, you can customize track routing. Use [ARROW] keys [UP] and [DOWN] to navigate the menu.

ROUTE TO MAIN highlight this option to customize which of the 12 tracks will send to the main output.

Use the [PADS] to activate/deactivate send from the track of each corresponding pad. <PADS> of a

green color send to main. Unlit <PADS> do not. Note that each track will still send to its individual output.

ROUTE TO FX highlight this option to customize the FX routing of the 12 tracks. Use the [PADS] to acti-

vate/deactivate each corresponding track for routing through the FX. <PADS> of a yellow color route to

FX. Unlit <PADS> do not.

14.7 CONTROL INPUT 1

This menu item accesses the settings for the Control In 1 input (labeled EXP/CV IN 1 on the Analog Rytm

MKII back panel). You can use this input to plug in dierent modulation sources. The modulation destina-

tions are set in the CONTROL IN 1 MOD menu in the KIT menu. For more information, please see “10.2.6

CONTROL IN 1 MOD” on page 27.