User Manual

14. GLOBAL SETTINGS MENU
63
14.10.3 FORMAT +DRIVE
You can erase all content of the +Drive. Once you have made your choices using the [LEFT] or [RIGHT]
arrow keys and confirmed by pressing [YES], a prompt will appear asking if the formatting procedure
should be executed. Press [YES] to proceed with the formatting.
PROJECTS+SOUNDS Erases all projects and Sounds. Tick/untick this box by pressing the [LEFT] or
[RIGHT] arrow keys.
SAMPLES Erases all samples. Tick/untick this box by pressing the [LEFT] or [RIGHT] arrow keys.
14.10.4 CALIBRATION
Calibration will start the calibration routine for the oscillators and filters. After selecting this option, a
popup window asking to confirm the calibration will appear. Press [YES] to proceed with the calibration.
Please note that the calibration routine takes quite a while to complete.
Please note that during calibration there will be loud and unpleasant sounds on the individual outs.
Disconnect these during calibration.
Analog Rytm MKII is factory calibrated. It should not be re-calibrated unless specifically
stated by Elektron Support or if prompted by the machine. Before calibrating, it is import-
ant that the unit has been turned on for at least two hours to attain working temperature.