User Guide

18
4.4 LIVE RECORDING MODE
LIVE RECORDING mode is the second method of adding trigs to the tracks. In this record-
ing mode, the [KEYBOARD] and the [TRIG] keys are played in real time to input trigs to the
tracks. You can also turn the DATA ENTRY knobs to enter lock trigs with parameter locks.
1. Press and hold [RECORD], then press [PLAY] to enter LIVE RECORDING mode.
The sequencer starts to play, and the [RECORD] key starts to flash red.
2. Press the [KEYBOARD] or the [TRIG] keys and turn the DATA ENTRY knobs to enter
trigs in real time. The [TRIG] key pressed determines the pitch value of the note trig.
3. Press [PLAY] to exit LIVE RECORDING mode while keeping the sequencer playing.
GRID RECORDING mode is activated if you press [RECORD] while LIVE RECORD-
ING mode is active.
4.5 STEP RECORDING MODE
STEP RECORDING is a quick and straightforward method of placing trigs on the sequenc-
er. In this recording mode, you insert notes by pressing the [TRIG] keys or the [KEY-
BOARD] (or via an external MIDI controller). The sequencer then captures the note and
automatically advances to the next step.
1. Press [RECORD] + [STOP] to enter STEP RECORDING mode. The [RECORD] key
starts to double-blink red.
2. Press a [TRIG] key to select the active step to where you want to start to add trigs.
3. Play the [KEYBOARD] or press [FUNC] + [TRIG] to add a note trig to the selected
step. The active step automatically advances to the next step.
4. To remove a trig or to add a rest (no trig), press the [TRIG] key for the trig that you
want to remove or add a rest to, and then press [NO].
4.6 PARAMETER LOCKS
Parameter locks enable all sequencer trigs to have their unique parameter values. The
note trigs of a synth track can, for example, have dierent a pitch, velocity or length set-
tings. It is possible to parameter lock all parameters found on the PARAMETER pages.