User Manual

9. PATTERNS, KITS, SOUNDS, AND SAMPLES
27
3. Turn DATA ENTRY knob D to bring up a list of samples.
4. Turn the knob counter-clockwise to scroll up the list, clockwise to scroll down the list. Press the
[TRIG] key of the active track while browsing to listen to the sample currently outlined.
5. Press [YES] to select a sample. Press DATA ENTRY knob D or [NO] to exit the list without selecting a
sample.
9.6.1 ASSIGNING A SAMPLE USING THE QUICK ASSIGN METHOD
You can also use the Quick assign method to load a sample to a track and the project’s Sound pool.
1. Press [SRC] to open the SOURCE page, and then turn the knob for the SAMP parameter.
2. While the Sample list is open, press [FUNC] + [YES] to open the SAMPLES menu. For more infor-
mation, please see “15.2 SAMPLES” on page 55.
3. Navigate to the sample you want to load. Any sample can be previewed (played back by the voice
of the active track), just highlight it and then press [FUNC] + [YES]. Approximately, ten seconds of
the sample can be previewed.
4. Highlight the sample, and then press [YES] to load it directly to the track and the project’s Sound
pool.