User Manual
10. THE SEQUENCER
32
• EXPORT SOUND Exports (saves) the active track’s Sound to the +Drive. Turn the LEVEL/DATA
knob or press [UP]/[DOWN] to choose a destination memory slot. Press [YES] to export the Sound.
Name the Sound and press [YES] again to confirm the export.
• MANAGE SOUNDS Opens the SOUND MANAGER. For more information, please see “9.3 SOUND
MANAGER” on page 24.
10.6 TRIG PARAMETERS PAGE
Set the actions for when a note is trigged in the TRIG PARAMETERS page. Press the [TRIG PARAME-
TERS] key to access the menu. Change settings using the DATA ENTRY knobs. These general settings
aect note trigs placed on the sequencer. On any step of the pattern, trigs can be locked to other settings
by first pressing and holding a [TRIG] key, then changing the settings. For more information, please see
“11.2 TRIG PARAMETERS PAGE” on page 38.
10.7 QUANTIZE MENU
Press [FUNC] + [TRIG PARAMETERS] to access this menu. Change settings with DATA ENTRY knob E
and F.
TRK. aects all micro-timed trigs of the active track in real time. The higher the quantize value, the more
all micro-timed trigs will be quantized. Press [TRACK 1–4] key to select track to quantize. (0–127)
GLOBAL aects all micro-timed trigs of all tracks in real time. The higher the quantize value, the more all
micro-timed trigs will be quantized. (0–127)
Press [FUNC] + [YES] to apply quantization to the pattern. Press [NO] to exit the menu.
10.8 METRONOME MENU
The METRONOME menu controls the internal metronome of the Digitakt. Press [FUNCTION] + [PTN] to
open the METRONOME menu. Use the DATA ENTRY knobs to change the settings.
ACTIVE activates/deactivates the metronome. You can also press [FUNC] + [PTN] and hold for a sec-
ond to toggle the metronome on and o when you are not in the METRONOME menu.
TIME SIG. controls the note and beat measure of the metronome time signature.
PREROLL BARS controls for how many bars the metronome will sound before the sequencer starts
playing. This setting is only relevant when you are in LIVE RECORDING mode.
VOL. controls the volume of the click.
10.9 SCALE MENU
The length and timing of the pattern and tracks is set in this menu. The SCALE menu has two modes. In
LENGTH PER PATTERN mode all tracks share the same length. In LENGTH PER TRACK mode each track
can have dierent lengths. Access the SCALE menu by pressing [FUNC] + [PAGE]. Press [FUNC] + [YES]
to toggle between the two SCALE modes. Use the DATA ENTRY knobs to adjust the dierent settings.