User Manual
10. THE SEQUENCER
34
Press [FUNC] + [UP]/[DOWN] to set the TRACK LENGTH in increments of 16.
10.10 MASTER PAGE
Press [FUNC] + [LFO] to access this menu. Here you can conveniently access the TRACK LEVEL
parameter of all the eight audio tracks. (0–127)
10.11 SEQUENCER FEATURES
10.11.1 PARAMETER LOCKS
Parameter locks makes it possible to set every trig to have its own unique parameter values. The note
trigs of an audio track can, for example, have dierent pitch, amp or filter settings. It is possible to pa-
rameter lock the parameters found on the PARAMETER pages, and you can apply parameter locks to
all types of tracks. For a complete overview of all parameters on the PARAMETER pages, please see “11.
AUDIO TRACK PARAMETERS” on page 38, and “12. MIDI TRACK PARAMETERS” on page 45.
To apply parameter locks in GRID RECORDING mode, press and hold the [TRIG] key of a trig (note trig
or a lock trig). Use the DATA ENTRY knobs to adjust the parameters you want to lock. The graphics
become inverted for the locked parameter, and the locked parameter values are displayed. The [TRIG]
key of the locked trig blinks red (for note trigs) or yellow (for lock trigs) to indicate the trig now contains a
parameter lock.
Remove a single parameter lock by holding [TRIG] + pressing the DATA ENTRY knob of the locked pa-
rameter. You can erase all parameter locks from a trig if you remove the note trig and then enter it again.
In LIVE RECORDING mode, turning a DATA ENTRY knob, or playing the [TRIG] keys in CHROMATIC
mode, will input parameter locks to the active track. Note trigs will be locked accordingly, and lock trigs
containing the locks will be placed on the sequencer steps not containing note trigs.
Press [NO] + one (or several) of the [TRIG] keys to erase a sequence of recorded trigs on a specific
track (or on several tracks) in time with the sequencer, i.e. all steps reached on the pattern playing will be
erased until the keys are released.
You can also remove specific parameter locks on a track in real time. In LIVE RECORDING mode, press
and hold [NO] and then press and hold the DATA ENTRY knob corresponding to the parameter that you
want to remove.
Up to 72 dierent parameters can be locked in a pattern. A parameter counts as one (1)
locked parameter no matter how many trigs that lock it. If for example the cuto parame-
ter of the filter is locked on every sequencer step, there are still 71 other parameters that
can be locked.
10.11.2 SOUND LOCKS
You can change a tracks Sound to another Sound from the Sound pool on any individual sequencer
step. These Sound locks are an immensely useful feature for adding variations to a track. Press and
hold a note trig and turn the TRACK LEVEL knob to open the Sound pool list. Use the TRACK LEVEL
knob to scroll through the list. Select the Sound you want to assign to the note trig and then release the
[TRIG] key. The [TRIG] key starts to flash to indicate that it contains a Sound lock. Press and hold the
[TRIG] key of the note trig to show the assigned Sound. For more information, please see “9.1.1 ADDING
SOUNDS TO THE SOUND POOL” on page 23.
10.11.3 CONDITIONAL LOCKS
On the TRIG page, there is a parameter called COND (Trig Condition) with which a set of conditional
rules can be applied to any trig, using a parameter lock. Each setting is a logical condition that will deter-
mine whether a trig set in the sequencer will be triggered or not. If the condition is true then the trig will