Instruction Manual

THE SOUND SYNTHESIS OF THE MACHINEDRUM

1. In the edit kit menu, press and hold [FUNCTION] and then press [RECORD]. A mes-

sage saying “COPY MACHINE” appears.

2. The settings are placed in the machine copy buffer. Now you can either change track

using the SOUND SELECTION wheel, or load a new kit and select a target track in

there.

3. Once the target track is selected, press and hold [

FUNCTION] and then press [STOP] to

paste the machine settings from the copy buffer. A message saying “PASTE MACHINE”

appears.

• Any previous machine settings will be overwritten when pasting.

• Once the machine is copied into the copy buffer, it can be pasted many times to

several tracks or kits. It will stay in the buffer until it is replaced by a new one.

• The UNDO command is available for this operation. Press the [FUNCTION] +

[STOP] once more to undo the paste operation.

CLEAR MACHINE

It is possible to clear a track, so no machine is connected to it.

1. In the EDIT KIT menu, press and hold [FUNCTION] and then [PLAY] to clear the

machine. A message saying “CLEAR MACHINE appears.

2. A track that you have used the clear machine function on will be displayed like this: