Instruction Manual

GLOBAL SETTINGS

is loaded. If this option is chosen, the QUICK MODE menu will be titled CHANGE SNAP-

SHOT.

LOAD means that all pattern, kit, song, mute settings and global data of the Snapshot

loaded to the Battery Backed Memory will be overwritten when a new Snapshot is loaded.

If this option is chosen, the QUICK MODE menu will be titled LOAD SNAPSHOT.

FORMAT DRIVE erases everything on the +Drive. If you want to format the +Drive press

the [ENTER/YES] key. A prompt will appear. Press [ENTER/YES] to format the +Drive.

Press [EXIT/NO] to cancel the operation.

• Note that formatting the +Drive will not erase the Snapshot loaded in the Battery

Backed Memory. However, any samples in the Sample bank loaded in the DSP will

be cleared immediately.

• At the bottom of the +DRIVE SETTINGS menu you will see how many Snapshots

and Sample banks your unit contains.

• The NEGOTIATE setting in the TURBO menu will just like the QUICK MODE setting

stay the same no matter which Snapshot that is loaded.

• If a Snapshot is locked it will always behave as if the QUICK MODE setting was set

to LOAD.

SNAPSHOT MANAGER (+DRIVE UNITS ONLY)

In this menu you can load, save, rename, erase, lock and unlock Snapshots.

1. Select the FILE row in the GLOBAL EDIT menu. Then select SNAPSHOTS and press

[ENTER/YES].