User Manual

16
Setting Display Description
Output Channel Sets the MIDI channel that Analog Drive uses to send MIDI data. No
MIDI data is sent when set to OF (OFF). (Range 1—16, OF)
Output Thru Sets the behavior of the MIDI OUT port.
OF = O. Only sends data from the pedal.
ON = On. Forwards data from MIDI IN.
MM = Midi Merge. Merges and sends the data both from the MIDI
IN port and from the pedal.
Expression Mid Sets the Exp Mid jack to receive CV or Expression pedal signals.
E = Expression
CU = CV
To calibrate the range of the expression pedal: Connect the expres-
sion pedal to Exp Mid. Press PRESET and move the expression
pedal to max and then to min position.
Expression Gain Sets the Exp Gain jack to receive CV or Expression pedal signals.
E = Expression
CU = CV
To calibrate the range of the expression pedal: Connect the expres-
sion pedal to Exp Gain. Press PRESET and move the expression
pedal to max and then to min position.
Expression
Destination
Sets the destination of the signal from Exp Gain and Exp Mid.
IE = Internal and External (MIDI)
–E = Only External (MIDI)
I– = Only Internal
–– = No destination
Preset Destination Sets the destination of the PRESET knob (Program change).
IE = Internal and External (MIDI)
I– = only Internal
Continuous con-
trollers Destination
Sets the destination of the continuous controllers (knobs).
IE = Internal and External (MIDI)
–E = Only External (MIDI)
I– = Only Internal
–– = No destination