User Manual

8. DIGITONE KEYS CONTROLS
26
Press and hold [USER MODE] for a second to toggle between USER and DEFAULT param-
eter assignments.
ASSIGNING PARAMETERS TO THE CONTROL KNOBS
1. Press [FUNC] + [USER MODE] to open the USER MODE ASSIGN menu.
2. Use LEVEL/DATA knob or the [UP]/[DOWN] keys to select which knob to assign a parameter to, and
then press [YES].
3. Use LEVEL/DATA knob or the [UP]/[DOWN] keys to select which parameter to assign to the selected
knob, and then press [YES].
4. Press [USER MODE], and then select USER to view your assignments.
QUICK ASSIGNING PARAMETERS TO THE CONTROL KNOBS
1. Press [USER MODE] to open the USER MODE menu, and then use [LEFT]/[RIGHT] keys to
select USER.
2. Press and hold [YES], and then turn the CONTROL knob you wish to assign a parameter to.
3. While holding [YES], use [PARAMETER] keys and DATA ENTRY knobs to select parameter.
4. Release [YES].
REMOVING PARAMETER ASSIGNMENTS FROM THE CONTROL KNOBS
1. Press [USER MODE] to open the USER MODE menu.
2. Use [LEFT]/[RIGHT] keys to select keys to select USER.
3. Press and hold [YES], and then press the CONTROL knob corresponding to the parameter you wish
to remove.
You can also use the PARAMETER knobs to remove the parameters assignments.
• When you select USER, the CONTROL knobs control the following parameters per
default:
1: Filter Attack
2: Filter Decay
3: Filter Sustain
4: Filter Release
5: Ratio C
6: Feedback
7: Reverb send
8: Filter Envelope Depth
• On a MIDI track, the CONTROL knobs control the VAL1–VAL8 parameters. For more
information, please see “12.5.1 VAL1-VAL8” on page 56.