User Manual

9. PATTERNS AND SOUNDS
30
9.5.8 OCTAVE
Sets the base octave of the Sound. This setting makes it easier to play the sound at the “right” octave on
the Digitone Keys [KEYBOARD]. It also makes Sound locking more practical since you can control the
octave setting on the Sound and minimize the need to transpose the sequencer notes to make two or
more Sounds work together.
9.5.9 PITCH BEND
Opens a menu where you can assign up to four PARAMETER page parameters to the PITCH WHEEL
or pitch bend data from incoming MIDI. Press [YES] to open the menu. You can also press [PTCH] to
access this menu directly.
You can select parameters from the SYN1, SYN2, FLTR, AMP, and LFO PARAMETER pages. Turn the
DATA ENTRY knobs A–D to select the track parameters that you wish to assign. Press [YES] to confirm
the selection. Then use DATA ENTRY knobs E–H to set the modulation depth of the parameters. The
depth is an oset of the original parameter value.
9.5.10 VELOCITY MOD
Opens a menu where you can assign up to four PARAMETER page parameters to the [KEYBOARD]
velocity or velocity from incoming MIDI data. The VEL parameter on the TRIG menu also aects the
assigned parameters. Press [YES] to open the menu. Setting up the parameters works in the same way
as for PITCH BEND.
9.5.11 MOD WHEEL
Opens a menu where you can assign up to four PARAMETER page parameters to the MOD WHEEL or
mod wheel data (CC #1) from incoming MIDI. Press [YES] to open the menu. Setting up the parameters
works in the same way as for PITCH BEND. You can also press [MOD] to access this menu directly.
9.5.12 BREATH CONTROLLER
Opens a menu where you can assign up to four PARAMETER page parameters to the MIDI breath con-
troller command (CC #2). Press [YES] to open the menu. Setting up the parameters works in the same
way as for PITCH BEND.
9.5.13 AFTERTOUCH
Opens a menu where you can assign up to four PARAMETER page parameters to the [KEYBOARD]
aftertouch or aftertouch from incoming MIDI data. Press [YES] to open the menu. Setting up the parame-
ters works in the same way as for PITCH BEND.
9.6 ARPEGGIATOR MENU
The ARPEGGIATOR menu controls the Sounds arpeggiator. The arpeggiator settings are part of the Sound
and saved together with the Sound. The arpeggiator is not available for the MIDI tracks. Press [FUNC] +
[SYN1] to open the ARPEGGIATOR menu. Press [T1–4] key to select the Sound whose arpeggiator are
edited. Press [FUNC] + [TRACK NOTE] to toggle the ARPEGGIATOR on and o.