User Manual

10. THE SEQUENCER
38
10.7.5 RELOAD FROM PROJ
You must have saved the pattern at least once before you can reload pattern information.
WHOLE PATTERN Reloads the active pattern’s sequence data and four Sounds from the +Drive. A
prompt appears when you select this option. Press [YES] to reload, or [NO] to cancel the operation.
SOUNDS DATA Reloads the active pattern’s four Sounds from the +Drive. A prompt appears when you
select this option. Press [YES] to reload, or [NO] to cancel the operation.
SEQUENCE DATA Reloads the active patterns all sequence data from the +Drive. A prompt appears
when you select this option. Press [YES] to reload, or [NO] to cancel the operation.
10.7.6 IMPORT/EXPORT
Here you can manage the sounds on the Digitone Keys. You can also press [FUNC] + [PATTERN MENU]
to access this menu directly.
IMPORT SOUND Imports (copies) a Sound from the +Drive to the active pattern. Turn the LEVEL/
DATA knob or press [UP]/[DOWN] to scroll through the list. Press [YES] to select a Sound and then
press [T1–4] to select the track to where you want to assign the sound.
EXPORT SOUND Exports (saves) the active track’s Sound to the +Drive. Turn the LEVEL/DATA knob
or press [UP]/[DOWN] to choose a destination memory slot. Press [YES] to export the sound. Name
the Sound and press [YES] again to confirm the export.
MANAGE SOUNDS Opens the SOUND MANAGER. For more information, please see “14.2.2 SOUND
MANAGER” on page 65.
10.7.7 AUDIO ROUTING (PATTERN)
Here you find number of audio routing options that aects the Digitone Keys on a pattern level. You can
also set the audio routing on a global level. For more information, please see “14.5 AUDIO ROUTING
(GLOBAL)” on page 71.
USE GLOBAL SETTING uses, when ticked, the global audio routing settings for the active pattern.
ROUTE TO MAIN Use this option to customize which of the 4 tracks + 3 eects (Chorus, Delay, Reverb)
that sends audio through the master eect (Distortion) to the MAIN OUT outputs. Use the [TRACK] keys
and the [SYN2], [FLTR], and [AMP] [PARAMETER] keys to activate/deactivate send from each track
and eect. Green keys signal send to main. Red keys signal do not send to main. Note that each track
still sends to its TRACK OUTPUTS.
SEND TO FX Use this option to customize which of the 4 tracks + the Chorus and the Delay eects that
sends audio to the eects (Chorus, Delay, Reverb). Use the [TRACK] keys and the [SYN2], and [FLTR]
[PARAMETER] keys to activate/deactivate send from each track and eect. Green keys signal send to
the eects. Red keys signal do not send to the eects.
• Audio from the TRACK OUTPUTS is always without any eects.
• Tracks that are routed to not send audio to MAIN OUT still send audio on separate outputs
in Overbridge.
10.8 METRONOME MENU
The METRONOME menu controls the internal metronome of the Digitone Keys. Press [FUNCTION] +
[PTN] to open the METRONOME menu. Use the DATA ENTRY knobs to change the settings.