User Manual

10. THE SEQUENCER
44
10.11.1 CREATING A CHAIN
1. Press [BANK] + [TRIG 9–16] key to select bank.
2. Press and hold [PTN] and then press a [TRIG 1–16] key to select the first pattern in the chain.
3. Release the [PTN] key and then press [TRIG 1–16] keys in the same order as you want the chained
patterns to play. Keep a previous [TRIG] key pressed while you press the next one, the one after
that and so on. You can press the same [TRIG] key again if you wish to add the pattern multiple
times in a row. If you want to add a pattern from another bank, press [BANK] + [TRIG 9–16] to select
bank, and then press [TRIG 1–16] to select pattern.
4. Press [PLAY] to start the sequencer and play the chain. The chain will be looped once the final
pattern of the chain has played.
Please note that the chain will be lost when you create a new chain or when you select a new
bank/pattern. Also, chains cannot be saved and are lost when you switch the Digitone Keys
o.
• It is possible to create chains while the sequencer is running.
• You can also use MIDI program change messages from an external device to change
patterns on the Digitone Keys. For more information, please see “14.3.1 SYNC” on page
66.