User Manual

14. GLOBAL SETTINGS
68
Make sure to use the USB only setting for the INPUT FROM or OUTPUT TO settings
on the MIDI PORT CONFIG menu when you send or receive large amounts of data for
higher transfer speeds.
OUTPUT CH selects whether the knobs send data on the AUTO channel or the track channel.
PARAM OUTPUT selects what type of MIDI messages the DATA ENTRY knobs sends. For information
about which CC/NRPN parameters that are sent, please see “APPENDIX B: MIDI IMPLEMENTATION”
on page 92.
NRPN sends NRPN MIDI messages.
CC sends CC MIDI messages.
ENCODER DEST controls whether the DATA ENTRY, CONTROL, and LEVEL/DATA knobs send MIDI
data or not. When set to INT, the knobs only aect the Digitone Keys and send no MIDI data. When set
to INT + EXT, the knobs aect the Digitone Keys and also sends MIDI data to external devices.
TRIG KEY DEST controls whether the [TRIG] keys sends MIDI data or not. When set to INT, the
[TRIG] keys only aect the Digitone Keys and sends no MIDI data. When set to INT + EXT, the [TRIG]
keys aect the Digitone Keys, and also send MIDI data to external devices. When set to EXT, the
[TRIG] keys send MIDI data to external devices but do not aect the Digitone Keys.
KEYBOARD DEST controls whether the [KEYBOARD] sends MIDI data or not. When set to INT,
the [KEYBOARD] only aect the Digitone Keys and sends no MIDI data. When set to INT + EXT, the
[KEYBOARD] aect the Digitone Keys, and also send MIDI data to external devices. When set to EXT,
the [KEYBOARD] send MIDI data to external devices but do not aect the Digitone Keys.
MUTE DEST controls whether activating/deactivating mutes send MIDI data or not. When set to INT,
mutes only aect the Digitone Keys and no MIDI data is sent. When set to INT + EXT, mutes aect the
Digitone Keys and also send MIDI data to external devices. When set to EXT, mutes send MIDI data
externally but do not aect the Digitone Keys.
MW/PB/AT DEST controls whether the MOD WHEEL, PITCH BEND, and aftertouch send MIDI data
or not. When set to INT, these controls only aect the Digitone Keys and no MIDI data is sent. When
set to INT + EXT, these controls aect the Digitone Keys, and also send MIDI data to external devices.
When set to EXT, these controls send MIDI data externally but do not aect the Digitone Keys.
RECEIVE NOTES sets whether or not it is possible to use an external MIDI keyboard or controller to
play the Digitone Keys.
RECEIVE CC/NRPN sets whether or not it is possible to use an external MIDI device to control Digi-
tone Keys parameters with CC/NRPN data.
14.3.3 CHANNELS
This menu handles the MIDI channel configuration.
TRACK 1–4 CHANNEL selects dedicated MIDI track channel that controls the synth tracks. It also
sets the MIDI channel for the MIDI messages the DATA ENTRY knobs on the chosen track send. An
OFF setting makes the track disregard any incoming MIDI messages.
MIDI 1–4 CHANNEL selects dedicated MIDI track channel that controls the MIDI tracks. It also sets
the MIDI channel for the MIDI messages the DATA ENTRY knobs on the chosen track send. An OFF
setting makes the track disregard any incoming MIDI messages.
FX CHANNEL selects dedicated MIDI track channel that controls the FX parameters. It also sets the
MIDI channel for the MIDI messages the DATA ENTRY knobs on the FX pages send. An OFF setting
makes the track disregard any incoming MIDI messages.
AUTO CHANNEL selects the MIDI channel that gives access to the currently active track. If an exter-
nal MIDI keyboard connected to Digitone Keys sends MIDI data on this channel, the keyboard controls
the active track. This function is useful when you want to change quickly between the active synth