User Manual

14. GLOBAL SETTINGS
74
14.7.7 INVERT POLARITY
(Available when MODE is set to SUSTAIN.)
Sets the polarity of the port to accommodate for the two dierent standards on sustain pedals.
14.7.8 SEND MIDI
(Available when MODE is set to SUSTAIN.)
Sets if the sustain pedal data should be sent out through the MIDI OUT port or not.
14.8 CONTROL INPUT B
The available settings are the same as for CONTROL INPUT A but apply to signals from the CONTROL IN
B input.
14.9 MULTI MAP EDIT
The MULTI MAP mode gives you the possibility to map dierent functions to single notes or note ranges
on the [KEYBOARD], the [TRIG] keys or an external MIDI controller/keyboard. The functions that can be
mapped are: Internal trigging of Sounds on any track, trigging of MIDI notes on any MIDI channel and the
ability to trig patterns with custom transpose and timing settings. Multi map also allows custom mapped
keyboard splits, pattern triggering per key, Sound trig per key, MIDI trig of external synths, and more. In the
MULTI MAP mode, for example, full drum kits, bass lines, and lead sounds can be played simultaneously.
This makes it ideal for performances and live improvisations.
It is possible to map one unique function for each of the 128 keys of the entire MIDI keyboard range. There
are eight slots available for each project to store a complete multi map.
If you use an external keyboard or controller you can always access the MULTI MAP mode
if you use the dedicated MULTI MAP MIDI channel. For more information, please see “14.3.3
CHANNELS” on page 68.
Press [MULTI MAP] to toggle the MULTI MAP mode on/o.
There are two ways to select which multi map to edit and open the MULTI MAP menu.
1. In the GLOBAL SETTINGS menu, highlight MULTI MAP EDIT and then use the [LEFT]/[RIGHT] keys to
select the multi map slot you wish to edit, and then press [YES].
2. Press [FUNC] + [MULTI MAP]. Use the [LEFT]/[RIGHT] keys to select the multi map slot you wish to
edit, and then select EDIT MMAP SLOT, and press [YES].
14.9.1 MULTI MAP MENU
In the MULTI MAP menu, you find all the settings that relate to the multi map functionality. The multi map
settings are stored together with the project.