User Manual

ManualsBrandsElektron ManualsDJ productsModel: Cycles - GROOVEBOX FM 6 TRACKS

Table Of Contents

1. INTRODUCTION
- 1.1 CONVENTIONS IN THIS MANUAL
2. THE MODEL:CYCLES
3. PANEL LAYOUT AND CONNECTORS
- 3.1 FRONT PANEL
- 3.2 REAR CONNECTORS
- 3.3 SIDE CONNECTOR
- 3.4 SETTING UP AND STARTING THE MODEL:CYCLES
4. QUICK START
- 4.1 PLAYING THE FACTORY PATTERNS
- 4.2 PLAYING A PRESET CHROMATICALLY
- 4.3 MUTING THE TRACKS
- 4.4 SETTING THE TEMPO
- 4.5 LOADING A PRESET TO A TRACK
- 4.6 EDITING PARAMETERS
5. OVERVIEW OF THE MODEL:CYCLES
- 5.1 DATA STRUCTURE
- 5.2 ABOUT THE SEQUENCER TRACKS
  - 5.2.1 TRIGGER PRESETS
  - 5.2.2 SEND MIDI
- 5.3 SOUND ARCHITECTURE
  - 5.3.1 AUDIO VOICES
  - 5.3.2 EFFECTS
6. THE USER INTERFACE
- 6.1 MAIN SCREEN
- 6.2 NAVIGATION
- 6.3 PARAMETER EDITING
- 6.4 [FUNC] KEY PRESS COMBINATIONS
- 6.5 COPY, CLEAR, AND PASTE
- 6.6 NAMING MENU
7. MODEL:CYCLES CONTROLS
- 7.1 TRIG KEYS
- 7.2 ROTARY ENCODERS
- 7.3 PADS
  - 7.3.1 PAD MENU
- 7.4 KEY BEHAVIOR
- 7.5 EXTERNAL MIDI
- 7.6 CHROMATIC MODE
8. PRESETS
- 8.1 PLAYING A PRESET
  - 8.1.1 PLAYING A PRESET WITH AN EXTERNAL MIDI UNIT
- 8.2 EDITING A PRESET
- 8.3 COPYING A PRESET
- 8.4 THE PRESET MENU
- 8.5 THE LOCKS FOLDER
9. THE SEQUENCER
- 9.1 ABOUT PATTERNS
- 9.2 BASIC PATTERN OPERATIONS
- 9.3 EDITING A PATTERN
- 9.4 TRACK SETUP MENU
- 9.5 TRIG NUDGE MENU
- 9.6 RETRIG SETUP MENU
- 9.7 TRIG REPEAT MENU
  - 9.7.1 PLACING A RETRIG ON AN INDIVIDUAL SEQUENCER STEP
- 9.8 TRIG NOTE MENU
- 9.9 QUANTIZE MENU
- 9.10 CLICK MENU
- 9.11 SCALE MENU
- 9.12 SEQUENCER FEATURES
- 9.13 CHAINS
10. TRACK RELATED PARAMETERS
- 10.1 PARAMETER EDITING
- 10.2 MACHINES
- 10.3 TRACK PARAMETERS
- 10.4 PUNCH
- 10.5 GATE
- 10.6 LFO MENU
- 10.7 LFO SETUP MENU
11. FX PARAMETERS
- 11.1 REVERB
  - 11.1.1 REVERB SIZE
  - 11.1.2 REV TONE
- 11.2 DELAY
  - 11.2.1 DELAY TIME
  - 11.2.2 DEL FEEDBACK
12. CONFIG MENU
- 12.1 PATTERN
- 12.2 PROJECT
- 12.3 MIDI
- 12.4 AUDIO
- 12.5 BACKUP
  - 12.5.1 SENDING BACKUP PROJECT/PATTERN DATA
  - 12.5.2 RECEIVING BACKUP DATA
- 12.6 UPGRADE
  - 12.6.1 UPGRADING OS IN STANDARD MODE
  - 12.6.2 UPGRADING OS IN LEGACY MODE
- 12.7 DEVICE
13. STARTUP MENU
- 13.1 EXIT
- 13.2 EMPTY RESET
- 13.3 FACTORY RESET
- 13.4 OS UPGRADE
  - 13.4.1 UPGRADING OS FROM STARTUP MENU
14. KEY SHORTCUTS
15. TECHNICAL INFORMATION
16. CREDITS AND CONTACT INFORMATION
APPENDIX A: MIDI SPECIFICATIONS
- A.1 TRACK PARAMETERS
- A.2 PLAYBACK PARAMETERS
- A.3 LFO PARAMETERS
- A.4 FX PARAMETERS
APPENDIX B: MODULATION DESTINATIONS
APPENDIX C: UNISON AND CHORD SETTINGS
INDEX

APPENDIX B: MODULATION DESTINATIONS

The following are the modulation destinations for the Model:Cycles’s LFO and Velocity:

LFO

• Pitch

• Fine Tune

• Decay

• Color

• Shape

• Sweep

• Contour

• Delay Send

• Reverb Send

• Volume + Distortion

• Pan

• Punch

• Gate

VELOCITY

• Pitch

• Fine Tune

• Decay

• Color

• Shape

• Sweep

• Contour

• Delay Send

• Reverb Send

• Volume + Distortion

• Pan

• Punch

• Gate

• LFO Speed

• LFO Mult

• LFO Fade

• LFO Wave

• LFO Start Phase

• LFO Trig Mode

• LFO Depth

APPENDIX C: UNISON AND CHORD SETTINGS

These are the unison and chord settings you can choose with the SHAPE parameter if you select the

Chords machine. For more information, please see “10.3.3 MACHINE PARAMETERS” on page 37.

• Unison×2

• Unison×3

• Unison×4

• minor

• Major

• sus2

• sus4

• m7

• M7

• mMaj7

• Maj7

• 7sus4

• dim7

• madd9

• Madd9

• m6

• M6

• mb5

• Mb5

• m7b5

• M7b5

• M#5

• m7#5

• M7#5

• mb6

• m9no5

• M9no5

• Madd9b5

• Maj7b5

• M7b9no5

• sus4#5b9

• sus4add#5

• Maddb5

• M6add4no5

• Maj7/6no5

• Maj9no5

• Fourths

• Fifths

Color

Shape

Sweep

Contour