User Manual

12. PATTERNS
69
presses to create melodic sequences. Trigless trigs, instead of sample trigs, can be recorded if [FUNC]
is held while pressing the [TRIG] keys.
When a sample is trigged in this mode, the PTCH parameter of the SRC MAIN page will be temporarily
adjusted to a semitone in a 2-octave range. The 2-octave range is only valid for audio tracks; on MIDI
tracks notes can be played over a much wider octave range. Change the octave range of the [TRIG]
keys by pressing [FUNC] + [LEFT]/[RIGHT]. The current octave is indicated to the left of the graphical
keyboard representation.
The [TRIG] keys indicate the black and white keys. C notes are represented by yellow [TRIG] keys, white
keys are indicated by red [TRIG] keys and black keys are indicated by unlit [TRIG] keys. The root note of
the sample is found on octave 0 and located on [TRIG] key 13.
When in MIDI mode the [TRIG] keys send note on/o commands on the active MIDI track channel.
In this mode the [TRIG] keys sends the same MIDI notes out (if configured to send MIDI out) that they
play internally.
12.7.3 SLOTS
This mode gives quick access to the samples of the Flex and Static sample slot lists. Depending on the
machine assigned to the active track, pressing a [TRIG] key when no RECORDING mode is active will
trig a specific sample in either the Flex or Static sample slot list. While in LIVE RECORDING mode it is
possible to real-time record the [TRIG] key presses to make dierent samples play back on the same
track. Trigged samples will then be entered as sample locks on the active track.
The sample slots are divided in 4 rows and each row represents 16 sample slots. Sample slots containing
samples are indicated by small black squares. Sample slots not containing any samples are greyed out.
Press the [PAGE] to move between the rows. If samples are loaded to slot 65 or higher, an additional
page containing four new rows will be accessed once the [PAGE] key has been pressed a sucient
amount of times.
In this mode the [TRIG] keys send no MIDI out.
12.7.4 SLICES
If a sample contains slices, this mode can be used to trigger the individual slices. While in LIVE RECORD-
ING mode it is possible to real-time record [TRIG] key presses to re-arrange sliced loops. The STRT
parameter will then be locked accordingly.
The slices are divided in 4 pages, each page containing 16 slices. Available slices are indicated by black
squares. Toggle between the pages by pressing the [PAGE] key.