User's Manual

Page 6 of 21
After the startup is complete, you will see a welcome screen and then show
you the Internet Radio mode.
Power off: Press and hold the power button to turn off the device.
2. Charging your MP-935WD
1. Connect the USB cable to your MP-935WD device, then connect the other
end of USB cable to the USB port on your PC.
2. The battery icon will display the impulse, after the charging, the battery
electricity will shows full grids.
3. It takes about 4 hours to fully charging the battery. Do not overcharge
(longer than 10 hours). Excessive charging or discharging may shorten
the battery’s life.
Note:
Fully charge (at least 8 hours) the rechargeable battery before using the player
for the first time or when it has not been used for a while.
3. Connect to Computer and Data File Transmission
1. Connect the USB cable to your MP-935WD player, then connect the other
end of USB cable to the USB port on your PC.
2. Select and organize files and folders in preparation for transfer to your
MP-935WD device.
4. Speaker output function
Under any status, press and hold the
button, two options pop up window
will appear on the screen,
This pop up window have two options, Speaker On(Off) and Voice recording
that can be selected. You can press and hold the button to enter into
Speaker on(off) function directly,
When your MP-935WD speaker output is enabled, you can select Speaker On
option from the above mentioned pop up window so that you can turn off the
Speaker function, or else, you can select Speaker Off option to turn on the
Speaker function.
5. Voice recording
Selection voice recording option from the above mentioned pop up window,
and press the button to start recording, press the button again to
pause recording, press the button once more to resume recording.
During the Voice recording, you can press menu button to stop recording and
return to main menu mode.
6. Setting Up the Wi-Fi