Manual
INSTALLING THE CHARCOAL FILTER
To install the charcoal filter, please follow the below instructions:
Place the carbon filter on top the wooden shelf.
The back of the filter has a 3M glue tape which you can
affix to the shelf or the inside of the unit.
OPERATING YOUR WINE COOLER
ON/OFF Power
To turn the appliance on or off, press the ON/OFF button.
Setting the
temperature Control
Set the desired cooling temperature by pressing the corresponding buttons for “upper
chamber / lower chamber” program. Each depression of the buttons will scroll through
the available temperature settings (for each compartment) in reduction of 1 degree. The
temperature selected will flash in the LED display for approximately 5 seconds, then
revert back to display the temperature of the internal cooler.
Upper Chamber :
The temperature setting can be adjusted from 4℃ to 18℃.
Lower Chamber :
The temperature setting can be adjusted from 4℃ to 18℃.
To view the “set” temperature (anytime) press one time, the “set” temperature will
temporarily “flash” in the LED display for 5 seconds.
This unit has the option to display temperatures in either Celsius or Fahrenheit. To
change the setting, press and hold both buttons (Set Lower Chamber/LIGHT)
simultaneously for approximately 5 seconds.
10