CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could avoid the users’ authority to operate this equipment. CAUTION: The TV shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the TV. CAUTION: Do Not Place This TV on an unstable cart, stand, or table. The TV may fall, causing serious injury to a child or adult, and serious damage to the TV.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. WARNING: THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES SHALL BE PLACED ON THE APPARATUS. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT IN OUTLET.
IMPORTANT SAFETY INSTRUCTIONS 1. READ THESE INSTRUCTIONS. 2. KEEP THESE INSTRUCTIONS. ON OR PINCHED PARTICULARLY AT PLUGS, 3. HEED ALL WARNINGS. CONVENIENCE RECEPTACLES, AND THE POINT 4. FOLLOW ALL INSTRUCTIONS. WHERE THEY EXIT FROM THE APPARATUS. 5. DO NOT USE THIS APPARATUS NEAR WATER. 10. PROTECT THE POWER CORD FROM BEING WALKED 11. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED Do not use this TV near water.
CLEANING AND MAINTENANCE The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent solution and then remove excess liquid. Use this cloth to wipe the surface of the display panel, and then wipe it with a dry cloth,of the same type, until the surface is dry.
Table of contents TABLE OF CONTENTS CAUTION AND WARNING………………………………………………….………….. 1 IMPORTANT SAFETY INSTRUCTIONS………………..………………..………..….. 3 CLEANING AND MAINTENANCE………………………………………….……………. 4 SAFETY PRECAUTIONS..…………………………………………………….………….. 6 INSTALLATION……………………………………………………………….….……….... 7 Preparation for using your new TV ……………………………………….…………... 8 FRONT PANEL………………………………………………………….……….………… 8 REAR PANEL…………………………………………………………………….....……... 9 CONNECTIONS AND EXTERNAL INPUT SETTINGS…………………………..….
Safety Precautions SAFETY PRECAUTIONS WARNING KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF SMALL CHILDREN. THESE OBJECTS CAN BE ACCIDENTALLY SWALLOWED. ALSO, BE CAREFUL ABOUT PACKAGING MATERIALS AND PLASTIC SHEETS. Set up Do not place the TV set on sloped or unstable surfaces. Do not place any objects on top of the TV set. If water spills onto the TV set or foreign objects get inside it, short-circuiting may occur which could result in fire or electric shock.
Safety Precautions When using the TV set Do not bring your hands, face or objects close to the ventilation holes of the TV set. Top of the TV set is usually very hot due to the high temperature of exhaust air being released through the Ventilation holes. Burns or personal injuries can happen if any body parts are brought too close. Placing any object near the top of the TV could also result in heat damage to the object as well as to the TV if its ventilation holes are blocked.
Preparation for using your new TV – Front Panel FRONT PANEL Familiarizing Yourself with the Main Hardware (The picture of the product may vary depending on the model) a. Select signal input. (It changes to “ENTER” function when main menu displays ) b. Main Menu display and menu selection c. Channel up d. Channel down e. Volume up f. Volume down g.
Preparation for using your new TV – Rear Panel REAR PANEL Rear panel (The picture of the product may vary depending on the model) HDMI Input S-Video Input - Input1 : J - Video : M - Input2 : K - Audio : D, D1 Component Input 1 VGA input - Video : E1, F1, G1 - Video : I - Audio : B, B1 - Audio : H (3.
Preparation for using your new TV – Connections CONNECTIONS AND EXTERNAL INPUT SETTINGS 1. Checking Items before Connecting Please check the list below before connecting the product to other devices. < Check items before connecting. > Check the instruction manual when connecting external devices. External products sometimes have different buttons and locations. A. Do not connect the power unless every connection is well connected.
Using the remote control – Learning about remote control LEARNING ABOUT REMOTE CONTROL 1. POWER: Power on/off. 2. SLEEP: Press to select a preset time interval to 3. ASPECT: Press to adjust the screen size. 4. DISPLAY: Press to Check your current mode. 5. MTS: Press to select your favorite language in automatically shut the TV. digital broadcasting. 6. DTV: Press to change between Analog TV and Digital TV. 7. FAV: Add/delete the current channel to your favorite channel. 8. FAV.
Using the remote control – Remote control instructions REMOTE CONTROL INSTRUCTIONS < Inserting the batteries into the remote control > 1. Push the back of the remote control. 2. Pull forward slightly. 3. Insert two AAA 1.5V batteries. 4. Ensure the correct polarity (+/-). 5. Close the lid. CAUTION: Use only Alkaline Batteries. z If the remote control is not working, see the checkpoints below.
Basic operation – Choosing TV Channel TURNING ON AND OFF THE TV TURN ON LCD TV 1. Connect the AC input cable to power to the LCD TV. At this time the TV will enter standby mode and indicator show red. 2. User POWER button or 3. Wait 5 second after switch off LCD TV then you can turn on LCD TV again. button on the remote control. CHOOSING TV CHANNEL 1. 2. Using the CH + / CH - on the front panel or on the remote control. z Press CH + to increase channel number.
Basic operation – Selecting input source SELECTING INPUT SOURCE You can select the input source by pressing the INPUT on the remote control or on the side panel. VOLUME ADJUSTMENT 1. Press VOL+/- to adjust the volume. 2. If you want to switch the sound OFF, press the MUTE. 3. You can cancel the mute function by pressing MUTE or VOL+/-.
Setup menu operation – Adjust the OSD screen ADJUST THE OSD SCREEN Press the MENU button to display the main menu. Use / / / buttons to select and adjust the available menus. NOTE: The OSD (On Screen Display) function enables you to adjust the screen status conveniently until it provides graphical presentation. When the cursor stays on a main menu function (Picture, Audio, Setup or Feature), you need to use ENTER or button to activate it.
Setup menu operation – Screen Language & Picture Menu Option SELECT ON SCREEN LANGUAGE NOTE: If you use your LCD TV for the first time, you should select the language which will be used for displaying menus and indications. 1. Press MENU to display the main menu. 2. Press 3. Use 4. Press ENTER button to select your desired language. / / repeatedly to select the SETUP MENU. and ENTER to select MENU LANGUAGE.
Setup menu operation – Audio menu options Contrast Press ENTER button to select it and then use / to adjust the contrast of picture. / to adjust the brightness of picture. / to adjust the sharpness level of picture. / to adjust the color saturation. / to adjust the tint of picture.
Setup menu operation – Setup menu options Audio Language Press ENTER to one of the audio language such as English / French and Spain, but the condition is that the program system has included the language code. Bass Press ENTER button to select it and then use / to increase or decrease the level of the lower-pitched sounds. / to increase or decrease the level of the higher-pitched sounds. / to adjust the audio output between left and right speakers.
Setup menu operation – Setup menu options Auto Ch Search Press / to move the cursor to the item to be selected (item selected highlighted in yellow). Press ENTER key to enter your selection and scan. After the scan is finished, the following menu will display. The channels found the automatically saved as below: Note: If you want you exit the Auto Ch Search during the Auto search process, press MENU twice to exit.
Setup menu operation – Feature menu options Menu Language To select language of the OSD such as English/ French and Spain. Reset Press ENTER to return to the factory setting. FEATURE MENU OPTIONS / Press MENU on the front panel or on the remote control and then use / to select the FEATURE menu 1. Use to select what you want to adjust in the FEATURE menu. 2. Press ENTER button to select it and then use 3. When you are satisfied with your adjustment, press MENU to exit the main menu.
Setup menu operation – Feature menu options Sleep Timer Press ENTER button to select it and then use / to select the amount of time before your TV turn off automatically and press the ENTER that can select the 15’ / 30’ / 45’ / 60’ / 90’ / 120’ / 180’ / 240’ and OFF. Advance Video Menu Press ENTER to enter the advance video menu as below z Noise Reduction - Spatial: press z Noise Reduction -Speaker :press / to select on or off. z Noise Reduction-Temporal: press / to select on or off.
Setup menu operation – Feature menu options Note: Advanced Rating is only available in digital channel. US Ratings Press ENTER to enter the US Ratings as below MPAA Press ENTER to lock or unlock one of None/ G/ PG/ PG-13/ R/ NC-17 and X. z None: No restrictions z G: General Audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations. z PG: Children under 13 should be accompanied by an adult. z PG-13: Parental guidance suggested.
Setup menu operation – Feature menu options z TV-V7: Directed for older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of seven. z TV-Y: All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two six.
Setup menu operation – Feature menu options Advanced Parental Lock When select the ON for Advance Rating, the Advanced Parental Lock will display. Digital Closed Captions This menu allows you to set the closed caption, and press ENTER to enter Closed Caption Options menu as below: z Style: press / to select between Automatic and Custom, when you select automatic, the other options are disable and can not be adjusted. z Size: press / to select between Normal/ Large and Small.
Setup menu operation – VGA menu options VGA MENU OPTIONS Continuously Press [INPUT] on the remote control until coming VGA on the top-right screen. / to select what you want to adjust in the FEATURE menu. 1. Use 2. Press ENTER button to select it and then use 3. When you are satisfied with your adjustment, press MENU to exit the main menu. / to adjust.
Setup menu operation – YPBPR menu options screen size also will change. Position- This function is to adjust the picture to Left/ Right and Up/ Down as you prefer. Auto Adjust Press ENTER button to select it and then use / to do auto adjust that automatically adjusts the available options for the best viewing configuration. Setting Press ENTER to do preset that can return to the factory setting.
Setup menu operation – HDMI menu options HDMI MENU OPTIONS Continuously Press [INPUT] on the remote control until coming “Component” on the top-right screen. 1. Use / to select what you want to adjust in the FEATURE menu. 2. Press ENTER button to select and then use / to adjust. 3. When you are satisfied with your adjustment, press MENU to exit the main menu. Time Set Press / button and then use ENTER the time set menu that allows you to set the time the TV will display.
Appendix-Troubleshooting TROUBLESHOOTING Identifying Problems If there are any problems using the product, please first consult the list below. If the list below does not solve the problem, call our Customer Service Center immediately. Q: My television won't power on. What could be wrong? A: Make sure your power cord is firmly plugged into both the back of the TV and the power outlet. Some models have a power switch on the back of the TV - make sure it is in the ON position.
Appendix-Troubleshooting Q: I opened the box and an accessory was missing. What do I do? A: Please call our Customer Service team so we can get you a replacement. Go to the “Contact Us” portion of the web site and enter your model number to obtain the correct customer support phone number. Q: Why am I getting a black square in the center of my television screen? A: The Closed Caption function is set in the “text” mode.
Appendix-Troubleshooting wide field of view in the theater. Scope is much wider than your widescreen TV, so it still requires the use of letterboxing ("black bars") to fit the entire image on screen. Some TVs and DVD players have a zoom function that allows you to blow up the image so it fills the screen, but the sides of the image must be cropped in order to do so. Q: My TV is making a buzzing/humming noise.
Appendix-Removing TV Stand Removing TV Stand If you decide to install the wall mount your LCD TV, always use a VESA standard wall mount appropriate for the size and weight of the LCD TV. CAUTION z Be sure to follow the instructions. Incorrect installation of the stand/wall mount may result in the TV falling over. z Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal. z Unplug and remove any cables and/or other component connectors from the rear of the TV.
Appendix-Wall Mounting Unit Specification Wall Mounting Unit Specification Unit Dimension(unit: mm) 400x200 Screw Diameter Screw Length(unit: mm) M5 12 Remark: The specification of screw is just used on the back cabinet. NOTE: Wall mount bracket is not included with TV and mounting of wall mount bracket to wall may vary depending on brand and size of bracket. Customer should consult bracket mounting instructions that came with wall mount for specific information on how to mount bracket to wall.
Appendix-Universal Remote Control Code List UNIVERSAL REMOTE CONTROL CODE LIST For Universal Remote Control brands listed below, please use accompanying codes and refer to your Universal Remote Control User Manual for basic instruction for changing TV code to operate TV model.
Appendix-TV Specification TV SPECIFICATION Model 32LE30Q Diagonal display size 32 inches Television system American TV standard ATSC /NTSC system Audio multiplex BTSC system VHF: 2~13 Channel coverage UHF: 14~69 CATV:1~125 Digital Terrestrial Broadcast (8VSB): 2~69 Digital cable (64/256 QAM): 1~135 PC mode 640×480/60Hz, 800×600/60Hz, 1024×768/60Hz YPbPr/YCbCr mode 480i/60Hz, 480p/60Hz, 720p/60Hz, 1080i/60Hz HDMI Mode 480i/60Hz, 480p/60Hz, 720p/60Hz, 1080i/60Hz Resolution 1366×768 Power s