ELEFJ191 19” 720p LED HDTV Instruction Manual Read all of the instructions before using this TV and keep the manual in a safe place for future reference.
Important Safety Instructions Read these instructions – All the safety and operating instructions should be read before this product is operated. Keep these instructions – The safety and operating instructions should be retained for future reference. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions – All operating and use instructions should be followed.
Contents Caution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 What’s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caution The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons.
Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. To prevent overload, do not share the same power supply socket with too many other electronic components.
What’s Included Unit and Accessories TV Set Remote Control with Batteries ELEFJ191 19” 720p LED HDTV Instruction Manual Read all of the instructions before using this TV and keep the manual in a safe place for future reference.
COAXIAL AUDIO VIDEO L R HDMI2 1.Coaxial audio signal out socket. 2.AV input. 3.HDMI input. AC 5V USB 500mA HDMI1 VGA PC AUDIO Y PB PR RF (75 ) 8 1.AC power input. 2.USB input. 3.HDMI input. 4.VGA input. 5.PC audio input. 6.Component input terminal. 7.Antenna input(75 Ohm VHF/UHF). 8.Headphone output.
COAXIAL AUDIO VIDEO L R HDMI2 Connecting to External Devices AC 5V USB 500mA HDMI1 VGA PC AUDIO Y PB PR 8 RF (75 )
Remote Control Key Functions Power button Mute button Numeric buttons Channel setup button Return channel button Picture mode button Sound mode button SLEEP button MTS button Signal source selection button Information button Channel selection button Volume adjust button CH.
Remote Control Key Functions 79 $9 &RPSRQHQW +'0, +'0, 9*$ 86% :LGH =RRP &LQHPD 1RUPDO REPEAT 3UHVV 5(3($7 EXWWRQ WR VHOHFW WKH UHSHDW PRGH ZKHQ SOD\ PXVLF RU SKRWR LQ 86% VRXUFH 10
Operating Your Television Basic Operations Turning Your TV On and Off TURN ON LED TV 1. Connect to power with the main power cable, at this time the TV will enter STANDBY mode and the LED will be red. 2. From the STANDBY mode, use the POWER button either on the main unit or on the remote to turn your television on. TURN OFF LED TV From ON mode, use the POWER button either on the main unit or on the remote to turn your television to STANDBY mode.
Operating Your Television Note: If you want change the modes between Home Mode(Energy Saving) and Standard Mode, you can change the setting in the Setup Menu under Display Mode. ENERGY STAR R is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). ENERGY STAR R is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and pratices.
AUTO Operating Your Television Navigating the Onscreen Display Press the MENU button to display the main menu. Use / buttons to navigate and select the available menus. Picture Picture Standard Picture Mode Audio Contrast 50 Brightness 50 Color 50 0 Tint Time Setup Time 50 Sharpness Color Temp.
Operating Your Television Selecting Input Source You can display the input screen menu by pressing SOURCE on the remote control or SOURCE at the side of the panel, press / button to select, press “OK” to confirm. INPUT SOURCE TV AV Component HDMI1 HDMI2 VGA USB Picture Menu Options Press the MENU at the side of the panel or MENU on the remote control and then use PICTURE menu, press or OK to enter (see picture below).
Operating Your Television Audio Menu Options Press MENU at the side of the panel or MENU on the remote control and then use / to move to the AUDIO menu, press or OK to enter (see picture below). NOTE: Adjust the parameters of the sound,the Sound Mode is automatically converted to User Mode. Sound Mode Press / and then use Bass Press / and then use / to select User, Standard, Music and Movie. Picture Sound Mode Audio / increase or decrease the level of the Time lower-pitched sounds.
Operating Your Television Setup Menu Options Press the MENU at the side of the panel or MENU on the remote control and then use or OK to enter (see picture below). SETUP menu, press to move to the / Picture English Menu Language Menu Language Press / and then use Français or Español.
Operating Your Television Lock Menu Options Press the MENU at the side of the panel or MENU on the remote control and then use or OK to enter (see picture below). LOCK menu, press / to move to the Use the DOWN button to highlight the “Enter Password”item, use the numeric keys to input 4-digital password, then the screen will display the junior menu. After settings, press menu button to exit. NOTE: The factory password is 0000.
Operating Your Television Parental Control Press Enter to enter the sub-menu and then use the 0-9 to enter the correct password: 0,0,0,0. If used, this option feature can “block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV.
Operating Your Television Channel Menu Options Press the MENU at the side of the panel or remote control and then use Press or OK to enter (see picture below). Air/Cable Allows you to select antenna between Air and Cable. / to move to the CHANNEL menu. Picture Cable Air/Cable Audio Auto Scan Favorite If you select “Air”as input signal in Antenna item, you can press RIGHT button to search the channels automatically. Time Show/Hide Channel No.
Operating Your Television Show / Hide Allows you to show or hide the channels. Use UP or DOWN button to highlight the “Show / Hide” item, then press RIGHT button to enter into the following menu. Use UP and DOWN button to highlight the desired item, then press OK button to show or hide the highlighted channel. Picture Audio Channel Channel Name 50-1 KOCE-HD KOCE-SD KOCE-LB 50-2 50-3 Favorite Time Setup Channel No. Display the number of current channel.
USB Multimedia Operation Multimedia Operation: Music selected with p buttons. USB Photo C: rewind Music C:\MP3\ .. .. U01-1.mp3 U01-2.mp3 U01-3.mp3 U02-1.mp3 Title: Artist: Album: Year: BitRate: 192K Stop 00:00 Play File :0 Total size:3.8 GB Unused size:3.7 GB 00:00 001/005 Select Move Repeat Multimedia Operation: Photo JPEG USB Photo C: Music C:\PICTURE\ .. 2010100.jpg 2010100.jpg 2010101.jpg 2010102.jpg 2010103.jpg Play File :0 Total size:3.8 GB Unused size:3.
Troubleshooting If your television does not operate normally or does not turn on, please check the following troubleshooting questions. Remember to also check the other connected electronic devices, such as DVDs or Blu-ray players to pinpoint any problem. If the television still fails to operate normally, please contact technical support (refer to Warranty page). SYMPTOM POSSIBLE CAUSE REMEDY Dead. No LED lit No power to the TV. Check all connections to the TV’s AC socket. Dead.
Troubleshooting Before contacting the service technician, perform the following simple checks. If any problem still persists, unplug the LED TV and call for assistance. PROBLEM POSSIBLE SOLUTION No sound and picture - Check that the main plug has been connected to a wall outlet - Check that you have pressed the POWER button on the front of the TV set - Check the picture contrast and the brightness setting Red LED indicator light Set in standby mode.
Troubleshooting NOTE: When there is a problem in VGA mode (only when VGA mode is applied) PROBLEM POSSIBLE SOLUTION The signal is out of range - Adjust resolution, horizontal frequency, or vertical frequency - Check whether the signal cable is connected or loose - Check the input source Vertical bar or stripe on background, horizontal noise and Set the auto configure or adjust clock, phase or H/V incorrect position position Screen Color is unstable or is a single Color - Check the signal cable - Re-ins
The FCC Wants You To Know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications.
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. To find out how to properly dispose of this product, please go to www.elementelectronics.
