Digital LED TV Please refer to the actual product INSTRUCTION MANUAL Please read all the instructions carefully before using this TV, and keep the manual for future reference.
CONTENTS Important Safety Instructions 2 Additional Safety Information 3 Preparations 4 What is Included Front / Side View Wall Mounting Remote Control Connecting External Devices Operating Your TV 9 10 Turning On/Off Your TV Setup Wizard Selecting The Input Source Channel Selection Volume Adjustment Customizing TV Settings 12 Navigating the On-screen Display Picture Settings Audio Settings Time Settings Setup Menu Lock Settings Parental Control Channel Settings USB Multimedia 21 Viewing Pict
IMPORTANT SAFETY INSTRUCTIONS Read these instructions – All the safety and operating instructions should be read before this product is operated. Keep these instructions – The safety and operating instructions should be retained for future reference. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions – All operating and use instructions should be followed.
ADDITIONAL SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. • To prevent overload, do not share the same power supply socket with too many other electronic components.
PREPARATIONS What is Included? TV Set Remote Control with Batteries Digital LED TV Please refer to the actual product INSTRUCTION MANUAL QUICK START GUIDE Please read all the instructions carefully before using this TV, and keep the manual for future reference.
PREPARATIONS Front/Side View • Switch the TV between On / Standby mode. • SOURCE Press to select among different input signal sources. • MENU ? ! % • CH Press to select a channel. • VOL +/Press to adjust the volume. • LED The LED light indicates when the TV is activated. • IR Infrared Receiver.
PREPARATIONS Rear View Headphone Output HDMI Input A Optical Output VGA Audio Input Wall Mounting WARNING Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be acoided by taking simple precautions such as: Using cabinets or stands recommended by the manufacturer of the television set.
PREPARATIONS Remote Control Power Button Picture Mode Button Sound Mode Button USB Button ASPECT Button Sleep Button Numeric Buttons Channel Setup Button Return Button Mute Button Volume Adjust Button TV Setup Menu Button MTS Button Channel Selection Button Signal Source Button FREEZE Button Information Button Return Button Up Button ENTER Button Left Button CH.LIST Button Stop Button Play/Pause Button REPEAT Button AUTO Button ADD/ERASE Button Right Button Down Button EXIT Button Prev.
PREPARATIONS Remote Control TV Operation USB P.MODE S.MODE SLEEP ASPECT 0~9 VOL+/CH / SOURCE MENU MTS FREEZE INFO RETURN OK CH.LIST EXIT CC V-CHIP AUTO ADD/ERASE FAV Switch the TV between on and standby mode. Access into the USB directly. Select picture mode: Dynamic/Movie/Natural/User/Standard. Select sound mode: Standard/Music/Movie/User. Set the TV sleep timer: off/5/10…/180/240 min. Select the aspect ratio settings:Normal/Wide/Zoom/Cinema/Just ! 9 0 +; %\ ] ! 9 8^ %
OPERATING YOUR TV Turning On/Off Your TV • Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. button on the main unit or on the remote control to • In Standby Mode, press the turn the TV on. The red LED indicator will turn blue. The POWER button on the main unit or on the remote control can only switch the TV into standby.
OPERATING YOUR TV Selecting The Input Source • Press the SOURCE button on the main unit or on the remote control to display the Input Source list. buttons to select your • Press the desired input source among: TV/ " } 8\0 +;\8^ \_ ] then press OK 19”-24” 26”-55” Channel Selection • Press the CH /CH buttons on the main unit or on the remote control repeatedly to select the channel. • Press the 0-9 buttons on the remote control to select the channel directly.
CUSTOMIZING TV SETTINGS Navigating the On-screen Display Press the MENU button to display the main menu. buttons to navigate and select the available menus. Press the Picture Picture Picture Mode Audio Time Standard Contrast 50 Brightness 50 Color 50 0 Tint Color Temp.
CUSTOMIZING TV SETTINGS Picture Settings • Press the MENU button on the main unit or on the remote control then buttons to select press the PICTURE menu and then press the or the OK button to enter. buttons to select the • Press the following picture options and then buttons to adjust each press the option’s setting. Picture Picture Mode Audio Time Standard Contrast 50 Brightness 50 Color 50 0 Tint 50 Sharpness Setup Color Temp.
CUSTOMIZING TV SETTINGS Audio Settings Press the MENU button on the main unit or on the remote control then press the buttons to select AUDIO menu and then press the or the OK button to enter. buttons to select Press the the following audio options and then buttons to adjust each press the option’s setting.
CUSTOMIZING TV SETTINGS Time Settings • Press the MENU button on the main unit or on the remote control then buttons to select press the TIME menu and then press the or the OK button to enter. buttons to select • Press the the following time options and then button to adjust each press the option’s setting.
CUSTOMIZING TV SETTINGS Setup Menu Press the MENU button on the main unit or on the remote control then buttons to select press the SETUP menu and then press the or the OK button to enter. buttons to select Press the the following setup options and then buttons to adjust each press the option’s setting.
CUSTOMIZING TV SETTINGS Lock Settings • Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. the • Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. buttons to select the following options and then press the • Press the buttons to adjust each option’s setting.
CUSTOMIZING TV SETTINGS Parental Control Press the MENU button on the main unit or on the remote control and then press the buttons to select LOCK menu. Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV.
CUSTOMIZING TV SETTINGS !! " # $ %! Grade ^ | ^ Suggested G PG PG-13 Parents Strongly Cautioned R Restricted NC-17 X No Rating No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program.
CUSTOMIZING TV SETTINGS Channel Settings Press the MENU button on the main unit or on the remote control and buttons to select then press the CHANNEL menu. buttons to select the Press following channel options and then buttons to adjust each press the option’s setting. Picture Air/Cable Audio Auto Scan Favorite Time Show/Hide Channel No. Setup DTV Signal Lock Channel Air/Cable Move Select Exit Select antenna between Air and Cable. Find and store all available channels automatically.
USB MULTIMEDIA Viewing Pictures • Press the SOURCE button on the main unit or on the remote control buttons to select then press the the USB mode and then press OK button. • Press the buttons to select PHOTO and then press OK button. 9 |^ Operation Tips REPEAT Press to start or pause the photo playback. Press to stop photo playback. Press to play the previous track or view the previous photo. Press to play the next track or view the next photo. Press to select different repeat mode.
TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support !& 9 ' % SYMPTOM 22 POSSIBLE CAUSE Dead. No LED lit No power to the TV. Dead. No LED lit red Set in standby mode. Blue screen No signal. Incorrect source selected.
TROUBLESHOOTING Before contacting the service technician, perform the following simple checks. If any problem still persists, unplug the LED TV and call for assistance. PROBLEM POSSIBLE SOLUTIONS • Check that the main plug has been connected to a wall outlet. • Check that you have pressed the POWER on the No sound and picture front of the TV set. • Check the picture contrast and the brightness setting. • Set in standby mode.
TROUBLESHOOTING * 8^ PROBLEM The signal is out of range Ve r t i c a l b a r o r s t r i p o n t h e background, horizontal noise and incorrect position Screen color is unstable or is a single color ! 8^ % POSSIBLE SOLUTIONS • Adjust resolution, horizontal or vertical frequency. • Check whether the signal cable is connected or loose. • Check the input source. • ' H/V position. { • Check the signal cable.
FCC NOTES responsible for compliance could void the user’s authority to operate the equipment.” “NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly.
