FLX-3210 32” LCD Television
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. Manufactured under license from Dolby Laboratories.
FCC Federal Communications Commission Statement 1. Reorient/Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit which is different from what the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user authority to operate the equipment.
Warnings and Precautions Warnings and Precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. This symbol is intended to alert the user to avoid the risk of electric shock. This equipment must not be disassembled by anyone except qualified service personnel.
Warnings and Precautions ▪ Use and handle the power cord with care. Do not place any heavy objects on the AC power cord. ▪ Do not touch the power cord and antenna cable during lightning. ▪ Remove the plug from the wall outlet, if the equipment will not be used for a long period of time. ▪ Do not place, use or handle this equipment near water. ▪ Never expose the equipment to liquid, rain, or moisture. Seek for service if any of the above is spilled into the equipment.
Warnings and Precautions Outdoor Antenna Safety Instructions If an outdoor antenna is connected, follow the precautions below: ▪ An outdoor antenna should not be located in any area where it could come in contact with overhead power lines, or any other electric light or power circuits. ▪ When installing an outdoor antenna system, extreme caution should be taken to prevent contact with power lines. Direct contact with power lines may be fatal and should be avoided at all costs.
TABLE OF CONTENTS Warnings and Precautions Important Safety Instructions ....................................................................................... 2 Antenna Safety Instructions ......................................................................................... 4 Chapter 1 Introducing the LCD TV Key Features ............................................................................................................... 6 Package Contents ..................................................
Chapter 1 Introducing the LCD TV Chapter 1 Introducing the LCD TV Key Features Various Audio/Video terminals for external equipment connection ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ 2 sets of composite A/V input terminals 1 set of S-VIDEO terminals 2 sets of component Video input terminals 1 VGA/ Audio input terminals 1 HDMI/Audio input terminals 1 set of Audio(L/R) output terminals 2 SPDIF output terminals (Optical x 1 /Coaxial x 1) 1 Headphone terminal The built-in TV tuner to receive HD ATSC ▪ This function allows the recep
Chapter 1 Introducing the LCD TV Package Contents LCD TV Bottom Stand / Screw Driver and Screws (4~6) Remote Control/ AAA Batteries x 2 S.MODE MTS P. MODE CAPTION SLEEP P.SIZE VIDEO Cable Component Cable AUDIO Cable Warranty Card MUTE VOL. GUIDE INFO INPUT CH. EXIT MENU Power Cord User’s Manual Quick Start Guide Stand Assembly Guide Remote Control Guide These items are all you need to set up and operate the LCD TV in its basic configuration.
Chapter 1 Introducing the LCD TV Setting Up Your LCD TV How to install the TV Stand Read all instructions before continuing with the stand installation. Attach the Stand the TV with the bottom foam packaging material still attached. a. b. Lift foam packaging material from the top of the LCD out of the box. Lift LCD out of the box, with the bottom foam packaging material still attached, and place onto a stable surface. a b Protective bag Stand c. d.
Chapter 1 Introducing the LCD TV How to remove the TV Stand If you prefer to mount your new Element Electronics TV on a wall instead of attaching it to the stand, please reference the instructions included in the wall mounting kit (sold separately). To prevent damaging the surface of the LCD TV, place the TV on a soft cloth. Soft cloth Remove the screws of the table stand and detach the table stand from the TV.
Chapter 1 Introducing the LCD TV How to setup the TV Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal (refer to page15-17). Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. Insert the 2 batteries supplied in remote control. Step1 Slide the back cover up to open the battery compartment of the remote control. Step2 Insert two AAA size batteries.
Chapter 1 Introducing the LCD TV Your LCD TV Front/Right Side View and Controls ENGLISH LED The LED light indicates when the LCD TV is activated. VIDEO L AUDIO R IR Infrared Receiver VIDEO VOLUME+Adjusts the volume up and down. Selects the main-menu item and change values for items when in the OSD mode. L R VIDEO1 IN CHANNEL▲▼ Scans up and down through channels. Selects sub-menu item when in the OSD mode.
Chapter 1 Introducing the LCD TV Rear View and Jacks VIDEO2 IN Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment. HDMI IN Connects the all digital AV equipment with HDMI connector.HDMI supports enhanced, high-definition video and two-channel digital audio. The AUDIO(L/R) of HDMI IN is for DVI connection. S-VIDEO IN Connects to the S-VIDEO and AUDIO(L/R) output jacks on external video equipment.
Chapter 1 Introducing the LCD TV Your Remote Control 1 22 MTS Cycles through the multi-channels TV sound(MTS) options: SAP/MONO/ STEREO 3 S.MODE Selects sound effect options: Surround/ Live/Dance/Techno/Classic/Soft/Rock/ Pop/Off. 4 P.MODE Selects picture mode: Vivid/Hi-Bright/ Cinema/Sport/User P.SIZE Cycles through Wide mode settings : NORMAL /FULL/WIDE/ZOOM CAPTION Cycles through the Closed Caption: Anlalog Closed Caption:CC1/CC2/ CC3/CC4/TT1/TT2/TT3/TT4/Off 2 S.MODE MTS P.
Chapter 2 Installing the LCD TV 13 S.MODE MTS P. MODE CAPTION SLEEP P.SIZE INPUT Pressing INPUT display the source list, use ▲▼ to select the video equipment connected to the video inputs of your LCD TV : TV/HDTV/VIDEO1/VIDEO2/ VIDEO3/VIDEO4/VIDEO5/VIDEO6/ COMPUTER Input Source TV(CABLE/AIR) VIDEO1 (SIDE) VIDEO2 (REAR) VIDEO3 (S-VIDEO) VIDEO4 (YPbPr1) VIDEO5 (YPbPr2) VIDEO6 (HDMI1) VIDEO7 (HDMI2) COMPUTER(VGA) 14 GUIDE Displays the Program Guide on the screen. Pressing again to turn GUIDE off.
Chapter 2 Installing the LCD TV Chapter 2 Installing the LCD TV Connecting a TV Cable or an Antenna Antenna Connection The antenna requirements for good color TV reception are more important than those for a black & white TV reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna systems.
Chapter 2 Installing the LCD TV Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna. B: Shows how to use a separate VHF and/or UHF outdoor antenna. A. Combination VHF/UHF antenna VHF/UHF Antenna 300/75-ohm adapter (not included) 300-ohm twinlead cable VHF/UHF Antenna 75-ohm coaxial cable B.
Chapter 2 Installing the LCD TV Cable TV (CATV) Connection ■ A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, connect the 75ohm cable into the ANT. terminal. ■ Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
Chapter 2 Installing the LCD TV Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal. HDTV/TV Air/Cab le VHF/UHF IN Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. HDTV/TV Air/Cab le VHF/UHF IN This TV is equipped with a safety fuse. In the event of an electrical storm or power outage the safety fuse is designed to protect your TV.
Chapter 2 Installing the LCD TV Press the button on the remote to turn on the LCD TV. ENGLISH Main TV(CABLE/AIR) VIDEO1 (SIDE) VIDEO2 (REAR) VIDEO3 (S-VIDEO) VIDEO4 (YPbPr1) VIDEO5 (YPbPr2) VIDEO6 (HDMI) COMPUTER(VGA) Press the INPUT button on the remote to display the Input List. Use the ▲▼ buttons to select TV and press the OK button.
Chapter 2 Installing the LCD TV Connecting a VCR Rear of TV HDMI IN VGA IN AUDIO OUT YPbPr1 IN AUDIO AUDIO Y Pb Pr STEREO AUDIO DIGITAL OPTICAL HDTV/TV Air/Cable L R L R L Y Pb Pr R L COAXIAL AUDIO VHF/UHF IN VIDEO L AUDIO VIDEO2 IN R L R S-VIDEO AUDIO S-VIDEO IN YPbPr2 IN L R R AUDIO Cable S-VIDEO Cable AV Cable A B METHOD A: Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s VIDEO2 IN jacks.
Chapter 2 Installing the LCD TV Connecting a Video Camera or Game console Rear of TV HDMI IN ENGLISH Right Side VGA IN AUDIO OUT VIDEO YPbPr1 IN AUDIO AUDIO Y Pb Pr STEREO AUDIO DIGITAL OPTICAL L HDTV/TV Air/Cable L R L R L Y R Pb Pr R L COAXIAL AUDIO VIDEO1 IN VHF/UHF IN VIDEO L AUDIO VIDEO2 IN R L R S-VIDEO AUDIO S-VIDEO IN YPbPr2 IN L R R AUDIO Cable or S-VIDEO Cable GAME CONSOLE B AV Cable A METHOD A: Use a composite cable to connect the video camera’s or game co
Chapter 2 Installing the LCD TV Connecting a DVD Player Rear of TV HDMI IN VGA IN AUDIO OUT YPbPr1 IN AUDIO AUDIO Y Pb Pr STEREO AUDIO DIGITAL OPTICAL HDTV/TV Air/Cable L R L R L R L Y Pb Pr R L COAXIAL AUDIO VHF/UHF IN VIDEO AUDIO VIDEO2 IN L R S-VIDEO AUDIO S-VIDEO IN L YPbPr2 IN R R or Pb Pr COMPONENT/AUDIO Cable AUDIO Cable S-VIDEO Cable AV Cable A B C Pb Pr D V D PLA YER METHOD A: Use a composite cable to connect the DVD player’s composite video/audio jacks to th
Chapter 2 Installing the LCD TV Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. button on the remote to turn on the LCD TV. To watch a DVD, press the Input button on the remote to select VIDEO2( METHOD A), or VIDEO3 ( METHOD B), or VIDEO4/VIDEO5 (METHOD C). For best picture quality, if your equipment has component video output, use a component cable instead of a composite video or S-video cable.
Chapter 2 Installing the LCD TV Connecting a Digital TV Cable Box or Digital Satellite Receiver Rear of TV HDMI IN VGA IN AUDIO OUT YPbPr1 IN AUDIO AUDIO Y Pb Pr STEREO AUDIO DIGITAL OPTICAL HDTV/TV Air/Cable L R L R L R L Y Pb Pr R L COAXIAL AUDIO VHF/UHF IN VIDEO AUDIO VIDEO2 IN L R S-VIDEO AUDIO S-VIDEO IN YPbPr2 IN Pb L R R Pr COMPONENT/AUDIO Cable Pb Pr Use a component cable to connect the satellite receiver’s/TV Cable Box’s component (YPbPr1) output jacks to the LCD
Chapter 2 Installing the LCD TV Connecting an AV Equipment with HDMI Connector Rear of TV ENGLISH HDMI IN VGA IN AUDIO OUT YPbPr1 IN AUDIO AUDIO Y Pb Pr STEREO AUDIO DIGITAL OPTICAL HDTV/TV Air/Cable L R L R L Y Pb Pr R L COAXIAL AUDIO VHF/UHF IN VIDEO L AUDIO VIDEO2 IN R L R S-VIDEO AUDIO S-VIDEO IN YPbPr2 IN L R R HDMI Cable AV EQUIPMENT Use a HDMI cable to connect the AV equipment’s HDMI output jack to the LCD TV’s HDMI IN jacks.
Chapter 2 Installing the LCD TV Connecting an AV Equipment with DVI Connector Rear of TV HDMI IN VGA IN AUDIO OUT YPbPr1 IN AUDIO AUDIO Y Pb Pr STEREO AUDIO DIGITAL OPTICAL HDTV/TV Air/Cable L R L R L Y Pb Pr R L COAXIAL AUDIO VHF/UHF IN VIDEO L AUDIO VIDEO2 IN R L R S-VIDEO AUDIO S-VIDEO IN YPbPr2 IN L R R AUDIO Cable AUD IO L HDMI-to-DVI Cable R DVI IN AV EQUIPMENT Use a HDMI-to-DVI cable to connect the AV equipment’s DVI output jack to the LCD TV’s HDMI IN jacks.
Chapter 3 Using the LCD TV Connecting a PC Rear of TV ENGLISH HDMI IN VGA IN AUDIO OUT YPbPr1 IN AUDIO AUDIO Y Pb Pr STEREO AUDIO DIGITAL OPTICAL HDTV/TV Air/Cable L R L R L Y Pb Pr R L COAXIAL AUDIO VHF/UHF IN VIDEO L AUDIO VIDEO2 IN R L R S-VIDEO AUDIO S-VIDEO IN YPbPr2 IN L R R AUDIO Cable VGA Cable PC Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’s VGA input jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’s.
Chapter 3 Using the LCD TV Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System For better sound quality, you may want to use a Home Theater/Stereo System. NOTE: If you have a Home Theater/Stereo System that you would like to use with your new Element Electronics TV, we recommend that you do NOT use your TV’s audio output for this connection. For the best sound quality, our product testing has shown that you should connect your Home Theater/Stereo System directly to your A/V device. I.E.
Chapter 3 Using the LCD TV Chapter 3 USING THE FEATURES ENGLISH Wide Screen Viewing Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through the following wide screen settings. Press the P.SIZE button repeatedly to select the screen format you want. FULL Stretches the image vertically and horizontally to keeps the image size consistent in the center of the screen and stretches the sides NORMAL is not available when you are watching 720p, 1080i, or 1080p source.
Chapter 3 Using the LCD TV Operating the Menu Press the button to turn the LCD TV on. Press the MENU button on the remote control,the on-screen menu will appear on the screen. Use the ◄► buttons to select your main menu option. VIDEO MENU: Allows you to make adjustments to your picture settings.
Chapter 3 Using the LCD TV TV MENU: Allows you to edit and label channels. ENGLISH Channel Scan Tuner Mode Channel Skip Time Zone Cable Eastern Time TV Select Exit SETUP MENU: Allows you to set up a variety of features: Language, Closed Caption, factory reset, Parental Control sleep timer. OSD Language Closed Caption Parental Gamma Reset Default English Middle Use the ▲▼ buttons to highlight the option of the sub-menu, and press the OK button.
Chapter 3 Using the LCD TV Customizing the VIDEO Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the VIDEO.
Chapter 3 Using the LCD TV Color temperature Color Temperature R Gain G Gain B Gain User 120 120 120 Noise Reduction Select to reduce the noise level of connected equipment: Off/Low/ Strong /Medium. VGA Press the OK button to enter the VGA Setting: Auto Setting H.Position V. Position Clock Phase VGA 72 31 127 Enter Select Exit ▪ Auto Setting Press the OK button to automatically adjust the display settings to optimize performance based on the VGA mode ▪ H.
Chapter 3 Using the LCD TV Customizing the AUDIO Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the AUDIO.
Chapter 3 Using the LCD TV SPDIF Type Allows to selection of the digital sound format: PCM/OFF/Dolby Digital ▪ Dolby Digital: The external audio system is connected to the AUDIO OUT DIGITAL (OPTICAL or COAXIAL) ot the LCD TV ▪ OFF: Select OFF to turn off the external audio system Audio Language Allows to select the audio language:English/Spanish/French. Speaker Allows to select to turn on or off the TV speakers.
Chapter 3 Using the LCD TV Customizing the TV Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the TV. Use the ▲▼buttons to highlight an individual TV option, use the ◄► buttons changes the setting, and press the MENU exits the menu.
Chapter 3 Using the LCD TV Press the ▼ button to select the desired channel, andpress the OK button repeatedly to select show ( ) or hide( ) Select Favorite List from the TV option and press the OK button.
Chapter 3 Using the LCD TV Customizing the SETUP Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the SETUP. Use the ▲▼ buttons to highlight an individual SETUP option, use the ◄► buttons to change the setting, and press the MENU to exit the menu.
Chapter 3 Using the LCD TV Digital Closed Caption: Press the ◄► buttons to select the digital closed caption options: Service1/Service2/Service3/Service4/Service5/Service6/OFF Caption Style: Press OK button to customize the settings for digital closed caption option: Custom Caption Style Font Size Font Color Font Opacity Background Color Background Opacity Window Color Window Opacity Parental Large White Solid Black Solid Black Translucent The Parental Control can be set up to the TV to block Channel
Chapter 3 Using the LCD TV Allows to block digital channels.
Chapter 3 Using the LCD TV Using the Program Block Settings Use the ▼ buttons to highlight Parental, and press the OK button. OSD Language Closed Caption Parental Gamma Reset Default English Middle Use the Parental function, must enter a four-digit password. The factory password is 0000. Password **** Program Block Channel Block Input Block Change Password Use the ▼ button to select the Program Block, and press the OK to display the Program Block menu. U.S.TV Ratings U.S.
Chapter 3 Using the LCD TV The Parental block menu includes the following options: U.S. TV Ratings Selects to activate the TV Rating programs. U.S. Movie Ratings Selects to activate the MPAA Rating programs Canadian English Ratings Selects to activate the English Rating programs of Canada. Canadian French Ratings Selects to activate the French Rating programs of Canada Block MPAA Unrated ▪ YES: Block all movies that are broadcast without a MPAA rating.
Chapter 3 Using the LCD TV U.S. TV Ratings The U.S.TV Rating has 2 rating methods: Content-Based Rating and Age-Based Rating. The U.S.
Chapter 3 Using the LCD TV Canadian English Ratings The Canadian Englsh Ratings includes the following options: G C8+ G PG 14+ 18+ Blocked Rating Allowed Rating Canadian English Ratings Select RATING DESCRIPTION G All children Back C8+ Children 8 years and older G General programming PG Parental guidance 14+ Viewers 14 and older 18+ Adult programming Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to select BLOCK or UNBLOCK .
Specifications U.S. Movie Ratings G PG PG-13 R NC-17 X Allowed Rating U.S. Movie Ratings Blocked Rating Select Back RATING DESCRIPTION G General Audiences. Movie is appropriate for all ages PG Parental Guidance Suggested. May contain material not suited for younger viewers PG-13 Contains content that may not be appropriate for viewers under the age of 13 R Restricted.
Chapter 3 Using the LCD TV Using the Program Guide The Program Guide feature brings all sorts of information to your screen, such as program title, program duration, time remaining, rating information, closed caption, availability, etc. With the LCD TV connected to a television programming source, press the INPUT button on the remote control and use the ▲▼ buttons to select TV and press the OK button.
Specifications SPECIFICATIONS MODEL Panel Size FLX-3210 32” TFT LCD Brightness 500 cm2 400 cm2 Contrast Ratio 800:1 1200:1 Max. Resolution Input Connector FLX-2610 26” TFT LCD 1366x768 1366x768 VIDEO/AUDIO(L/R) 2 2 S-VIDEO/AUDIO(L/R) 1 1 YPbPr/AUDIO(L/R) 2 2 VGA/AUDIO(L/R) 1 1 HDMI/AUDIO(L/R) 1 1 AUDIO OUT(L/R) 1 1 OPTICAL/COAXIAL 1 1 HEADPHONE 1 1 ENGLISH LCD Panel Power Source AC100~240V, 50/60HZ, 2.2A AC100~240V, 50/60HZ, 2.
