User Manual

NOTICE
Performance Guidelines
 Be sure to use the product as directed to maximize the performance quality and the
operational lifetime of your hardware.
 Be sure to place the device in a suitable environment. Do NOT place in damp, dusty,
erosive, or oxidative areas. Keep out of high-temperature locations as well as any other
extreme conditions.
 Be sure the hardware is safe and secure. Do NOT install in areas exposed to heavy
motion or places that put the hardware at risk of falling.
 Do NOT touch the power adapter with wet hands.
 Do NOT pull on the power supply cord under any circumstance.
 Be sure to turn the power off when not in use.
 Do NOT open hardware, remove cover, or touch any parts within the device.
 For best result, be sure to use the factory supplied power adapter.
 Before powering on, be sure to check the connections carefully for accuracy.
Troubleshooting
 No Power...First, double check the connections at both ends of the power supply. Also,
be sure the power switch is in the on position.
 No Picture...First, make sure the display is powered on and that the devices are properly
connected. Then, confirm the status of the source device is powered on and transmitting
signal. If the problem persists, check the signal quality at each connection by testing
each cable and each connection in the signal path. (NOTE: Cables should be HDMI V1.3
compliant.)
 Obscure Picture...First, try re-connecting the each cable to eliminate any poor connec-
tions. If the problem persists, check the signal quality at each connection by testing
each cable and each connection in the signal path. (NOTE: Cables should be HDMI V1.3
compliant.)
5