ELEFT195 19 " HD Digital LED TV
TABLE OF CONTENTS 1 IMPORTANT INFORMATION 2 2 PREFACE 4 3 SAFETY PRECAUTIONS 4 4 IN THE CARTON 6 5 FRONT/BACK CONNECTIONS OF TV 7 6 7 8 9 10 TV INSTALLATION DRAWINGS REMOTE CONTROL MENU OPERATION MEDIA MENU TROUBLESHOOTING Power Cord Connection 8 Antenna Connection 8 AV Connection 9 YPbPr ( c omponent ) Connection 9 VGA ( PC ) Connection 10 COAXIAL Connection 10 HDMI Connection 11 USB Function 11 Remote control instructions 12 Remote control setup 14 Basic Opera
IMPORTANT INFORMATION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is interded to aler the user to the presence of important operating and maintenance (servicing) instruction the literature accompanying the appliance.
IMPORTANT INFORMATION Important Safety Instructions Note: 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use near water. 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
PREFACE ENERGY STAR Qualification. This ELEMENT product has earned the ENERGY STAR for meeting U.S. Federal energy efficiency guidelines as set by the Department of Energy and Environmental protection agency. The ENERGY STAR program exists to provide energy saving guidelines and help promote energy efficient products and practices. Changes to certain features, settings and functions of this TV can change and/or increase its power consumption.
SAFETY PRECAUTIONS Power cord and cables must be properly placed and protected to prevent people from stepping on them and causing the TV to fall. Keep the TV dry and away from humidity. Keep the TV away from heat sources . Unplug the TV before cleaning it. Do not use solvent or liquid to clean the TV. Only clean the TV with a soft and dry cloth. In case of troubleshooting, do not use spare parts other than those suggested by the manufacturer.
IN THE CARTON 4. IN THE CARTON LED TV SET Remote Control 1.5V 1.5V AAA Batteries Warranty Card ELEFT195 18 .
FRONT / BACK CONNECTIONS OF TV 5. FRONT / BACK CONNECTIONS OF TV Front View 1. Press “VOL+” or “VOL-” to increase or decrease the volume. > < 2. Press “CH ” or “CH ” to scan through channels. 3. Press “MENU” to bring up the main menu on the screen. 4. Press “SOURCE” to select the input source. 5. Press “POWER” button to turn the TV on or off. 6. REMOTE SENSOR: Infrared sensor for the remote control. 7. POWER INDICATOR: Shows red in standby mode. Shows blue when your TV is turned on.
TV INSTALL ATION DRAWINGS 6. TV INSTALL ATION DRAWINGS Power Cord Connection - Connect the power cord correctly as shown. - Press the Power button of your L E D T V to turn on the L E D TV. The power indicator on the front panel lights up in blue. Antenna Connection To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection.
TV INSTALL ATION DRAWINGS AV Connection Connect the VIDEO and AUDIO output jack of the DVD or VCR to the VIDEO jacks on the set using the RCA cable. Match the jack colors: Video is green, Audio left is white, and Audio right is red. Select the AV input source using the SOURCE button on the remote control. VGA PC - AUDIO 5V USB 500mA TV Back Audio Cable Video Cable DVD or VCR Back DVD or VCR YPbPr ( Component ) Connection Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set.
TV INSTALL ATION DRAWINGS VGA ( PC ) Connection Connect the RGB output of the PC to the VGA ( PC ) jack on the set . Connect the AUDIO output of t he PC to the PC AUDIO jack on the set . Select the VGA input source using the SOURCE button on the remote control . VGA PC - AUDIO 5V USB 500mA TV Back VGA Cable Audio Cable COAXIAL Connection Connect to Audio Amplifier device to the Coaxial output jack on the TV.
TV INSTALL ATION DRAWINGS HDMI Connection HDMI plug which replaces the HDMI connection allows transfer of all audio / video/control signals through one cable only. These signals are transferred in digital. VGA PC - AUDIO 5V USB 500mA TV Back HDMI Cable DVD Back USB Function Insert the USB flash , drive to the USB port , select USB input source via the SOURCE button on the remote control .
REMOTE CONTROL 7 . REMOTE CONTROL Remote Control Instructions 21 22 25 26 29 30 24 23 28 27 32 31 Note : The picture of remote controller is only for reference and is subject to the real one.
REMOTE CONTROL 1 : Turn the LED TV ON or OFF. 2 : Press to mute the sound. Press again or press Vol + to un-mute the TV. 3 NUMBER BUTTONS: Press 0-9 to directly change the TV channel. 4 5 - : Press this button to enter a program number for multiple program channel such as 2-1,etc. : Return to the previous channel viewed. 6 P . MODE : Press repeatedly to cycle through the available video picture modes . 7 S . MODE : Press to cycle through the different sound settings .
REMOTE CONTROL Remote Control Setup 1. Open the cover. 2. Use two A AA size batteries . When inserting the batteries, make sure correct polarities “ + ” and “- ” marks on the batteries line up correctly with compartment markings . 3. Replace the battery cover. To prevent battery leakage which may result in bodily injury or damage to the remote: 1. Install all batteries correctly, and as marked on the remote control. 2.
MENU OPERATION 8 . MENU OPERATION Basic Operations Press button to select your desired mode , then press OK to enter. Choose your Picture Mode Home Mode ( Energy Saving ) Standard Mode OK Exit Are you sure you want Home mode? In this mode ENERGY STAR saving are realized. Yes No OK Return Return Select Your Onscreen Language Preference Note: If using your LED TV for the first time, you should select the language which will be used for displaying menus and information boxes.
MENU OPERATION Navigating the Onscreen Display Press the MENU button to display the main menu. Use buttons to navigate and select the available menus. PCM MENU MENU Air/Cable MENU MENU Display Mode Standard Mode MENU Choosing a TV Channel > < 1. Press the CH /CH at the side of the panel or CH + /CH - on the remote control to scan through channels . 2. Enter the channel number with the 0-9 remote keys , then press ' OK ' to confirm.
MENU OPERATION Picture Menu Options Press the MENU at the side of the panel or on the remote control and then use PICTURE menu, press or OK to enter (see picture below). to move the NOTE: Adjust the parameters of the picture, the Picture Mode is automatically converted to User Mode. Picture Mode Select the type of picture which best corresponds to your viewing preferences by selecting Picture Mode in the PICTURE menu. You may select the picture mode directly by pressing the P.
MENU OPERATION Auto Volume Press to switch auto volume control On or Off . This function allows volume to be controlled automatically . SPDIF Type Press to select between PCM or RAW. Audio Language Press to select audio languages among : English , French , Spanish . Time Menu Options Press the MENU at the side of the panel or on the remote control and then use TIME menu , press to move the or OK to enter ( see picture below ).
MENU OPERATION H - POS Press and then use V - POS Press and then use Clock Press and then use Phase Press and then use Auto Press and then use Closed Caption Press and then use to adjust the H - POS of the picture . to adjust the V - POS of the picture . to adjust the Clock of the picture. MENU to adjust the Phase of the picture. to adjust the picture. button to enter into the following menu. CC Mode Allows you to select the CC Mode among : Off , On or CC on Mute .
MENU OPERATION Change Password Use button to select the “Change Password” item, then press button to enter into the following menu. Input the new 4-digital password and input it again to confirm. System Lock Allows you to turn on or off the system lock. If you turn off the system lock, then the following items(US, Canada, RRT Setting and Reset RRT) will unable to use. US Use ▼ button to highlight the “US”item, then press to enter into the following menu.
MENU OPERATION Information Motion Picture Association of America (MPAA) Rating System / TV Parental Guideline Rating System Canadian Rating: Canadian English is used throughout all English-speaking Canada (C, C8+, G, PG, 14+, 18+). Canadian French is used in Quebec (G, 8 ans+, 13 ans+, 16 ans+, 18 ans+) Note: The V-Chip will automatically block certain categories that are “more restrictive”. If you block TV-Y category, then TV-Y7 will be automatically blocked.
MENU OPERATION Auto Scan Use press button to highlight “ Auto Scan”, then button to enter into the following menu. If you select “Air”as input signal in Antenna item, you can press button to search the channels automatically. The receivable channels will be stored automatically. When searching channels, press MENU to stop. MENU If you select “Cable”as input signal in Antenna item, allows you to select Cable System among: AUTO, STD, IRC and HRC.
MEDIA OPERATION 9 . MEDIA MENU Note : Before operating USB menu , plug in USB device , then press SOURCE button to set the Input Source to USB . Photo Menu Press button to select Photo in the main menu. Press button to select drive disk you want to watch , then press OK button to enter . USB Photo C: C:\ Music httptouxiangatouxian . dua ... httptouxiangatouxian . duapp . c ... piewms6 . jpg granags1 . jpg granags2 . jpg granags9 . jpg Play File : 005 Total size : 248 .
TROUBLESHOOTING 10. TROUBLESHOOTING Please check if you can solve problems by tr o ubleshooting yoursel f . Troubleshooting No signal No color shades Stain on the screen Double or multiple display image Control Please check that all cables are correctly plugged in. Adjust the contrast, the color and the brightness. May be the result from a lighting signal from car, motor, neon light and other electrical devices or appliances.
SPECIFICATIONS 12. SPECIFICATIONS This manual is only for your reference, any change to the design and specification will not be advised. Screen Size 18 .
