0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Elements of Design faucet are warranted fo the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges landlord damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools: i INSTALLATION INSTRUCTIONS For Use With OD's Wall Mount Tub Filler Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines ta clear any debris. 2. Shut off both supply lines after fishing. Install the spout on top of faucet body. 5 Connect water supply shank bo hot and cold water 6. Turn on water supply valves and check for leaks, supply line. especially all supply line connections. 4] 7] Apply Teflon tape 3.
Parts: Replacement Parts: Hot Cartridge KSRPT1000HC Cold Cartridge: KSRPT1000CC © Gar Shorthand: CCCX1H © &) Cold Handle: EXILIC CARE AND MAINTENANCE OF YOUR FAUCET Your Elements of Design faucet has hen finished to he mast strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.