0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Elements of Design faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt. This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
INSTALLATION INSTRUCTIONS Widespread Lavatory Faucet with or without Pop-Up BEFORE BEGINNING INSTALLATION: 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Need Tools: Fel) = Em Basin Wrench Adjustable Wrench Teflon Tape [my =e Silicone Sealant Screwdriver Drain Plug Mounting Nut Washer -— Washer ar H © Cod Sink Drain Tee Connector Apply Talon tape ¥ Opening Pivot Rod Opening 1. Remove the Tes Connector and spout 2. Sparingly apply a small bead of silicon 7.
Replacement Parts: (le g ridge: KBRP101C % Hot Handle: KBH1791AXH % Cold Handle: KBH17$1AXC CARE AND MAINTENANCE OF YOUR FAUCET Your Elements of Design faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Use a silicon based caulking when installing. 2.