0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Elements of Design faucet are warranted fo the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges landlord damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
INSTALLATION INSTRUCTIONS For Use With OD's Wall Mount Twin Handles Kitchen Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing 1] 2] 1. Shut off hot and cold war supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove old faucet 2. Turn on old faucet to remove any excess Walter in the supply lines. Apply Teflon tape onto both threads of supply elbows. 3] [4] 3.
Replacement Parts: Hot Carl ridge KSRPL2D0DHC er Cold Cartridge: 2 KSRPL2000CC @ Hot Handle: KBH1781 AXH © Cold Handle: KBH1781 AXC CARE AND MAINTENANCE OF YOUR FAUCET Your Elements of Design faucet has been finished lo he mast strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing. 2.