SDS

90689389_RET_NG - 9Elements Lemon Laundry Rinse Revision date 23-Dec-2019
Specific hazards arising from the
chemical
None.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Use personal protective equipment as required. Do not get in eyes, on skin, or on clothing.
Advice for emergency responders
Use personal protective equipment as required.
Environmental precautions
Should not be released into the environment
Methods and materials for containment and cleaning up
Methods for containment
Absorb with earth, sand or other non-combustible material and transfer to containers for
later disposal.
Methods for cleaning up
Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand,
earth, diatomaceous earth, vermiculite) and place in container for disposal according to
local / national regulations (see section 13).
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling
Use personal protective equipment as required. Keep container closed when not in use.
Never return spills in original containers for re-use. Keep out of the reach of children.
Conditions for safe storage, including any incompatibilities
Technical measures/Storage
conditions
Store away from other materials.
Storage Conditions
Store in corrosive resistant container. Storage in aluminum, unlined carbon steel or 304
stainless steel is not recommended. Do not store in copper, zinc, aluminum, copper alloy,
zinc alloy or aluminum alloy containers. Keep containers tightly closed in a dry, cool and
well-ventilated place.
Incompatible products
Metals.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
No exposure limits noted for ingredient(s).
No relevant exposure guidelines for other ingredients
Exposure controls
Engineering Measures Distribution, Workplace and Household Settings:
Ensure adequate ventilation
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Where reasonably practicable this should be achieved by the use of local exhaust
ventilation and good general extraction
Page 3 / 7