Installation Sheet

,
E NLE VEZ LES PLAQU ETTES A L ENDOS DE LA
PIECE DE FIX ATION EN DESSE RRANT LES VIS
SAN S TETE .
LACEZ LE COTE PLAT DE LA PLAQUETTE ARRIERE
P
,
CONTRE LE MUR A LA VER TICA LE.
M
ARQUEZ
LES POSITIONS DES TROUS DE CHEVILLE
AUX DEUX EXTREMITES DU SUPPORT MURA L.
P
ERCEZ DES TROUS AUX ENDROITS INDIQUES
ET ENFONCEZ DAN S LE MUR LES CHE VI LLES
FOURNIES.
F
IXEZ AU MUR LES PLAQU ETTES
,
ARRIERE A L AIDE DE DEUX VIS.
P
LACEZ LE SUPPORT MURAL SUR LES
PLAQUETTES ARRIERE ET SERREZ LES VIS
SANS TETE.
,
ENLE VEZ LES PLAQU ETTES A L ENDOS DE LA
PIECE DE FIX ATION EN DESSE RRANT LES VIS
SAN S TETE .
LACEZ LE COTE PLAT DE LA PLAQUETTE ARRIERE
P
CONTRE LE MUR A LA VER TICA LE.
M
ARQUEZ
LES POSITIONS DES TROUS DE CHEVILLE
AUX DEUX EXTREMITES DU SUPPORT MURA L.
P
ERCEZ DES TROUS AUX ENDROITS INDIQUES
ET ENFONCEZ DAN S LE MUR LES CHE VI LLES
FOURNIES.
F
IXEZ AU MUR LES PLAQU ETTES
,
ARRIERE A L AIDE DE DEUX VIS.
P
LACEZ LE SUPPORT MURAL SUR LES
PLAQUETTES ARRIERE ET SERREZ LES VIS
SANS TETE.
,
REMOVE THE BA CK PLAT ES FROM THE REAR OF
THE FITTING BY UNSCREWING TNE GRUB
SCREWS.
P
OSITION THE FLAT SIDE OF THE BAC K PLATE
VERTICALLY AGAINST THE WALL.
M
ARK THE
POSITI ONS OF THE SCREW FIXING HOLES FOR
BOTH ENDS OF THE WALL BRACKET.
D
RILL HOLES AT THE POSITIONS MARKED AND
PUSH THE PLUGS PROVIDED INTO THE WALL.
S
ECURE THE BACK PLATES TO THE WALL USING
THE TWO SCREWS.
P
LACE THE WALL BRACKET ON THE BACK
PLATES AND TIGHTEN THE GRUB SCREWS.
REMOVE THE BA CK PLAT ES FROM THE REAR OF
THE FITTING BY UNSCREWING TNE GRUB
SCREWS.
P
OSITION THE FLAT SIDE OF THE BAC K PLATE
VERTICALLY AGAINST THE WALL.
M
ARK THE
POSITI ONS OF THE SCREW FIXING HOLES FOR
BOTH ENDS OF THE WALL BRACKET.
D
RILL HOLES AT THE POSITIONS MARKED AND
PUSH THE PLUGS PROVIDED INTO THE WALL.
S
ECURE THE BACK PLATES TO THE WALL USING
THE TWO SCREWS.
P
LACE THE WALL BRACKET ON THE BACK
PLATES AND TIGHTEN THE GRUB SCREWS.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
WALLWALL
``
``
`` ``
``
````
``
`` ``
``
,
ENLE VEZ LES PLAQU ETTES A L ENDOS DE LA
PIECE DE FIX ATION EN DESSE RRANT LES VIS
SAN S TETE .
LACEZ LE COTE PLAT DE LA PLAQUETTE ARRIERE
P
,
CONTRE LE MUR A LA VER TICA LE.
M
ARQUEZ
LES POSITIONS DES TROUS DE CHEVILLE
AUX DEUX EXTREMITES DU SUPPORT MURA L.
P
ERCEZ DES TROUS AUX ENDROITS INDIQUES
ET ENFONCEZ DAN S LE MUR LES CHE VI LLES
FOURNIES.
F
IXEZ AU MUR LES PLAQU ETTES
,
ARRIERE A L AIDE DE DEUX VIS.
P
LACEZ LE SUPPORT MURAL SUR LES
PLAQUETTES ARRIERE ET SERREZ LES VIS
SANS TETE.
,
ENLE VEZ LES PLAQU ETTES A L ENDOS DE LA
PIECE DE FIX ATION EN DESSE RRANT LES VIS
SAN S TETE .
LACEZ LE COTE PLAT DE LA PLAQUETTE ARRIERE
P
CONTRE LE MUR A LA VER TICA LE.
M
ARQUEZ
LES POSITIONS DES TROUS DE CHEVILLE
AUX DEUX EXTREMITES DU SUPPORT MURA L.
P
ERCEZ DES TROUS AUX ENDROITS INDIQUES
ET ENFONCEZ DAN S LE MUR LES CHE VI LLES
FOURNIES.
F
IXEZ AU MUR LES PLAQU ETTES
,
ARRIERE A L AIDE DE DEUX VIS.
P
LACEZ LE SUPPORT MURAL SUR LES
PLAQUETTES ARRIERE ET SERREZ LES VIS
SANS TETE.
,
REMOVE THE BA CK PLAT ES FROM THE REAR OF
THE FITTING BY UNSCREWING TNE GRUB
SCREWS.
P
OSITION THE FLAT SIDE OF THE BAC K PLATE
VERTICALLY AGAINST THE WALL.
M
ARK THE
POSITI ONS OF THE SCREW FIXING HOLES FOR
BOTH ENDS OF THE WALL BRACKET.
D
RILL HOLES AT THE POSITIONS MARKED AND
PUSH THE PLUGS PROVIDED INTO THE WALL.
S
ECURE THE BACK PLATES TO THE WALL USING
THE TWO SCREWS.
P
LACE THE WALL BRACKET ON THE BACK
PLATES AND TIGHTEN THE GRUB SCREWS.
REMOVE THE BA CK PLAT ES FROM THE REAR OF
THE FITTING BY UNSCREWING TNE GRUB
SCREWS.
P
OSITION THE FLAT SIDE OF THE BAC K PLATE
VERTICALLY AGAINST THE WALL.
M
ARK THE
POSITI ONS OF THE SCREW FIXING HOLES FOR
BOTH ENDS OF THE WALL BRACKET.
D
RILL HOLES AT THE POSITIONS MARKED AND
PUSH THE PLUGS PROVIDED INTO THE WALL.
S
ECURE THE BACK PLATES TO THE WALL USING
THE TWO SCREWS.
P
LACE THE WALL BRACKET ON THE BACK
PLATES AND TIGHTEN THE GRUB SCREWS.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
WALLWALL
``
``
`` ``
``
````
``
`` ``
``
//
1 1
2 2
3 3
4 4
55
Date of manufacture: 10/05/2013Date of manufacture: 10/05/2013
00000010000001
RR
20180012018001
3030