Specifications

-2-
PARTS VERIFICATION
Before beginning the assembly process, familiarize yourself with the components and this instruction book.
Verify that all of the parts are present. This is best done by checking off the parts in the parts list.
RESISTORS CAPACITOR SEMICONDUCTORS
Electrolytic (radial)
Diode
2kΩ Potentiometer
LM317 Regulator LED
Knob
Transformer YD-1485
MISCELLANEOUS
Strain relief 2-wire
Heat sink
Carbon film
PC Board
Case top
Case bottom
Binding posts
Black Red
Binding post nut
Binding post
lockwasher
Screws
2.8 x 8mm
4-40 x 1/4”
6-32 x 3/8”
black
4-40
7mm
Nuts
6-32
Washers
Flat
8 x 14mm
Fiber #6
Lockwasher #6
Rubber foot
Shrink tubing
Label
Lead-free solder