Snap Circuits 500-in-1 Manual

-39-
OBJECTIVE: To construct a flashing display for the capital letter C.
Connect segments A, D, E & F to the circuit. Turn on the switch (S1), the display
flashes and the whistle chip (WC) buzzes on and off.
Automatic Display Capital Letter “C”
Project #411
OBJECTIVE: To construct a flashing display for the capital letter E.
Use the circuit from project #411. Connect A, D, E, F, & G to the circuit. Turn on the
switch (S1), the display flashes and the whistle chip (WC) buzzes on and off.
Automatic Display Capital Letter “E”
Project #412
Project #413
OBJECTIVE: To construct a flashing display for the capital letter F.
Use the circuit from project #411. Connect A, E, F,
& G to the circuit. Turn on the switch (S1), the
display flashes and the whistle chip (WC) buzzes
on and off.
Automatic Display
Capital Letter “F”
Project #414
OBJECTIVE: To construct a flashing display for the capital letter H.
Use the circuit from project #411. Connect B, C, E
, F, & G to the circuit. Turn on the switch (S1), the
display flashes and the whistle chip (WC) buzzes
on and off.
Automatic Display
Capital Letter “H”
Project #415
OBJECTIVE: To construct a flashing display for the capital letter P.
Use the circuit from project #411. Connect A, B, E,
F, & G to the circuit. Turn on the switch (S1), the
display flashes and the whistle chip (WC) buzzes
on and off.
Automatic Display
Capital Letter “P”
Project #416
OBJECTIVE: To construct a flashing display for the capital letter S.
Use the circuit from project #411. Connect A, F, G,
C, & D to the circuit. Turn on the switch (S1), the
display flashes and the whistle chip (WC) buzzes
on and off.
Automatic Display
Capital Letter “S”
Project #417
OBJECTIVE: To construct a flashing display for the capital letter U.
Use the circuit from project #411. Connect B, C, D,
E, & F to the circuit. Turn on the switch (S1), the
display flashes and the whistle chip (WC) buzzes
on and off.
Automatic Display
Capital Letter “U”
Project #418
OBJECTIVE: To construct a flashing display for the capital letter L.
Use the circuit from project #411. Connect D, E, &
F to the circuit. Turn on the switch (S1), the display
flashes and the whistle chip (WC) buzzes on and
off.
Automatic Display
Capital Letter “L”